Dual/Triple Ultra-Low-Voltage SOT23 關P Supervisory Circuits

The MAX6715–MAX6729 are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory trimmed or adjustable threshold and maintain reset for a minimum tim

Dual/Triple Ultra-Low-Voltage SOT23

The MAX6715–MAX6729 are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory trimmed or adjustable threshold and maintain reset for a minimum tim

双/三路、超低电压、SOT23封装、微处理器监控电路

MAX6715-MAX6729是超低电压µP监控电路，用于监视二路或三路系统电源。当任一被监视电源电压跌至工厂预置或可调门限以下时，这些器件会触发系统复位，在所有电源电压上升至门限以上之后，复位信号仍将在最小超时周期内保持有效。与离散IC或分立元件相比，这些集成的二/三路监控电路可显著提高系统的稳定性、并减小系统尺寸。\n\n 这些器件监视1.8V至5.0V主电源(VCC1)和0.9V至3.3V次级电源(VCC2)，具有工厂预置的复位门限选项(参见完整数据资料中的Reset Voltage Threshold Suffix Guide)。外部可调RSTIN输入允许用户监视低至0.62 • VCC1 (主电源电压)复位门限：1.58V至4.63V\n• VCC2 (副电源电压)复位门限：0.79V至3.08V\n• 外部可调RSTIN门限用于辅助电源/三路电源监视(0.62V内部基准)\n• 看门狗选项\n• 35s (最小值)长启动周期\n• 1.12s (最小值)正常超时周期\n\n\n• 手动复位输入选项\n• 电源失效输入/输出选项(推挽式和漏极开路低电平有效)\n• VCC1或VCC2低至0.8V时保证复位输出正常\n• 复位输出逻辑选项\n• 不受VCC瞬变影响\n• 3.6V供电时电源电流低至14µA (典型值)\n• 小尺寸5、6或8引脚SOT23封装;

Dual/Triple Ultra-Low-Voltage SOT23 uP Supervisory Circuits

文件：720.87 Kbytes Page：19 Pages

双/三路、超低电压、SOT23封装、微处理器监控电路

MAX6715A–MAX6729A/MAX6797A是超低电压µP监控电路，用于监视二路或三路系统电源。当任一被监视电源电压跌至工厂预置或可调门限以下时，这些器件会触发系统复位，在所有电源电压上升至门限以上之后，复位信号仍将在最小超时周期内保持有效。与离散IC或分立元件相比，这些集成的二/三路监控电路可显著提高系统的稳定性、并减小系统尺寸。 \n\n 这些器件监视1.8V至5.0V主电源(VCC1)和0.9V至3.3V次级电源(VCC2)，具有工厂预置的复位门限选项(参见完整数据资料中的Reset Voltage Threshold Suffix Guide)。外部可调RSTIN输入 • VCC1 (主电源电压)复位门限：1.58V至4.63V \n• 外部可调RSTIN门限用于辅助电源/三路电源监视(0.62V内部基准) \n• 35s (最小值)长启动周期 \n• 手动复位输入选项 \n• VCC1或VCC2低至0.8V时保证复位输出正常 \n• 不受VCC瞬变影响 \n• 可禁止看门狗工作 \n• MAX6719AUTTWD1/V+T通过AEC-Q100认证。;

Dual/Triple, Ultra-Low-Voltage, SOT23 uP Supervisory Circuits

General Description The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold an

Dual/Triple, Ultra-Low-Voltage, SOT23 uP Supervisory Circuits

General Description The MAX6715A–MAX6729A/MAX6797A are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory-trimmed or adjustable threshold an

Dual/Triple Ultra-Low-Voltage SOT23 關P Supervisory Circuits

The MAX6715–MAX6729 are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory trimmed or adjustable threshold and maintain reset for a minimum tim

Dual/Triple Ultra-Low-Voltage SOT23

The MAX6715–MAX6729 are ultra-low-voltage microprocessor (µP) supervisory circuits designed to monitor two or three system power-supply voltages. These devices assert a system reset if any monitored supply falls below its factory trimmed or adjustable threshold and maintain reset for a minimum tim

封装/外壳：SC-74A，SOT-753 包装：带 描述：IC SUPERVISOR MPU SOT23-5 集成电路（IC） 监控器

封装/外壳：SC-74A，SOT-753 包装：卷带（TR） 描述：IC SUPERVISOR MPU SOT23-5 集成电路（IC） 监控器

Dual/Triple Ultra-Low-Voltage SOT23 μP Supervisory Circuits

文件：720.87 Kbytes Page：19 Pages

Dual/Triple Ultra-Low-Voltage SOT23 uP Supervisory Circuits

文件：720.87 Kbytes Page：19 Pages

Dual/Triple Ultra-Low-Voltage SOT23 uP Supervisory Circuits

文件：720.87 Kbytes Page：19 Pages

One Watt Amplifier Transistor

One Watt Amplifier Transistor NPN Silicon

One Watt Amplifier Transistor

One Watt Amplifier Transistor NPN Silicon

NPN General Purpose Amplifier

NPN General Purpose Amplifier This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 1.0 A. Sourced from Process 39.

NPN General Purpose Amplifier

NPN General Purpose Amplifier This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 1.0 A. Sourced from Process 39.