4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4引脚、SC70微处理器复位电路，带有手动复位输入

MAX6711/MAX6712/MAX6713微处理器(µP)监控电路用于监控µP和数字系统中的电源。当与+5.0V、+3.3V、+3.0V或+2.5V供电电路一起使用时，它们无需外部元件，也不用进行调整，可实现非常可靠的低成本电路。同时还提供去抖手动复位输入。\n\n 每当VCC电源电压下降至预设阈值以下或每当手动复位信号置位时，这些电路都会将复位信号置位。在VCC上升到复位阈值以上或手动复位取消置位后，复位信号保持置位状态至少140ms。提供适用于各种工作电源电压的复位阈值。\n\n MAX6713具有漏极开路输出级，而MAX6711/MAX6712具有推挽输出。MAX • 对2.5V、3.0V、3.3V和5.0V电源电压进行精密监控\n\n• 可在整个温度范围内完全符合规格\n\n• 提供三种输出配置\n• 推挽低电平有效RESET输出(MAX6711)\n\n• 推挽RESET输出(MAX6712)\n\n• 开漏低电平有效RESET输出(MAX6713)\n\n\n\n\n• 上电复位脉冲宽度：140ms（最小值）\n\n• 手动复位输入\n\n• 电源电流：12µA\n\n• 低至VCC = +1V时确保复位有效\n\n• 电源瞬变抗扰度\n\n• 无需外部元件\n\n• 4引脚SC70封装;

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4引脚、SC70微处理器复位电路，带有手动复位输入

The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V, or +2.5V-powered circu \n• Precision Monitoring of 2.5V, 3.0V, 3.3V, and 5.0V Power-Supply Voltages \n• Fully Specified Over Temperature \n• Available in Three Output Configurations\n• Push-Pull active-low RESET Output (MAX6711) \n• Push-Pull RESET Output (MAX6712) \n• Open-Drain active-low RESET Output (MAX6713)\n• 140ms;

4-Pin SC70 Microprocessor Reset Circuits

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4引脚、SC70微处理器复位电路，带有手动复位输入

The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V, or +2.5V-powered circu \n• Fully Specified Over Temperature \n• Push-Pull active-low RESET Output (MAX6711) \n• Open-Drain active-low RESET Output (MAX6713)\n• Manual Reset Input \n• Guaranteed Reset Valid to VCC = +1V \n• No External Components \n• 4-Pin SC70 Package;

4-Pin SC70 Microprocessor Reset Circuits

General Description The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V,

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

文件：279.79 Kbytes Page：8 Pages

4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

文件：279.79 Kbytes Page：8 Pages

封装/外壳：SC-82A，SOT-343 包装：卷带（TR） 描述：IC SUPERVISOR 1 CHANNEL SC70-4 集成电路（IC） 监控器

封装/外壳：SC-82A，SOT-343 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC MPU/RESET CIRC SC70-4 集成电路（IC） 监控器

PLASTIC ENCAPSULATED DEVICES

文件：58.06 Kbytes Page：8 Pages

XGA dual input flat panel controller

GENERAL DESCRIPTION The SAA6713H is a dual input single-chip Thin Film Transistor (TFT) display controller IC with analog VGA and digital DVI 1.0 standard input capabilities. Additionally, the SAA6713H includes a wide range of functions for processing and the measurement of incoming RGB data acco

Microprocessor Supervisory Circuit in 4-Lead SC70

文件：155.9 Kbytes Page：8 Pages

XGA analog input flat panel controller

文件：498.43 Kbytes Page：100 Pages