±10V、14位、电压输出DAC，串行接口

\n• 不用调整即可获得14位性能 \n• 两个通用输入/输出(GPIO)引脚 \n• DNL < ±1 LSB，INL < ±2 LSB \n• ±10V、±5V、±2.5V, 0至+10V、0至+5V、0至+2.5V输出电压摆幅 \n• 宽电源电压范围 单电源：+12V至+15V 双电源：±12V至±15V \n• 单极性或双极性工作模式 \n• 输出可摆动至距电源轨0.5V以内 \n• 10MHz SPI™/QSPI™/MICROWIRE™兼容接口 \n• 上电时DAC初始化为0V输出 \n• 异步/CLAMP\\输入连接DAC输出至AGND;

Multifunctional Voltage Regulator for TVs and VCRs

Features • Low saturation type of regulator (ON/OFF function built in) • Control amplifier built in. • Current limit and thermal limit circuits built in • Reverse current prevention provided (VO4) Applications • Audiovisual equipment, VCRs and TVs

PHOTOMULTlPLlER TUBES

PHOTOMULTlPLlER TUBES For Scintillation Counting, Ruggedized, Compact, 19mm (3/4 Inch) Diameter, Bialkali Photocathode, 10–stage, Head–On Type

1쨌3GHz Bidirectional I2C Bus Controlled Synthesiser

The SP5611 is a single chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device contains 4 addressable bidirectional open collector ports, one of which is a 3-bit ADC. The information on these ports can be read via the I2C BUS. t

1쨌3GHz Bidirectional I2C Bus Controlled Synthesiser

The SP5611 is a single chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device contains 4 addressable bidirectional open collector ports, one of which is a 3-bit ADC. The information on these ports can be read via the I2C BUS. t

18-Line 3-5 Volt SCSI Active Terminator, Reverse Disconnect

文件：254.93 Kbytes Page：5 Pages