짹10V, Dual, 12-Bit, Serial, Voltage-Output DAC

General Description The MAX5322 dual, 12-bit, serial-interface, digital-to-analog converter (DAC) provides bipolar ±5V to ±10V outputs from ±12V to ±15V analog power-supply voltages, or unipolar 5V to 10V outputs from a single 12V to 15V analog power-supply voltage. The device features a fast 10

封装/外壳：28-SSOP（0.209"，5.30mm 宽） 包装：管件 描述：IC DAC 12BIT V-OUT 28SSOP 集成电路（IC） 数模转换器（DAC）

封装/外壳：28-SSOP（0.209"，5.30mm 宽） 包装：卷带（TR） 描述：IC DAC 12BIT V-OUT 28SSOP 集成电路（IC） 数模转换器（DAC）

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

2.5 V to 5.5 V, 230 uA Dual Rail-to-Rail, Voltage Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5302/AD5312/AD5322 are dual 8-, 10-, and 12-bit buffered voltage output DACs in a 10-lead MSOP that operate from a single 2.5 V to 5.5 V supply, consuming 230 μA at 3 V. Their on-chip output amplifiers allow the outputs to swing rail to-rail with a slew rate of 0.7 V/μs.

NTE5326/NTE5327/NTE5328 Silicon Bridge Rectifier, Single-Phase, 25 Amp

Features: • Superior Thermal Design • Surge Overload Rating: 400A (Peak) • Hole Through for #8 Screw • Silverplated Copper Terminals

Silicon Bridge Rectifier, Single-Phase, 25 Amp

Features: ● Superior Thermal Design ● Surge Overload Rating: 400A (Peak) ● Hole Through for #8 Screw ● Silverplated Copper Leads

SOT23-6W 120mA 2ch LDO REGULATORS

OUTLINE The R5322N Series are voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection by CMOS process. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, resistors for setting Output Voltage, a