2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2线接口、串行、8位DAC，满摆幅输出

MAX517/MAX518/MAX519均为8位电压输出数模转换器(DAC)，具有简单的2线串行接口，支持在多个器件之间进行通信。它们采用5V单电源供电，其内部精密缓冲器使DAC能够提供轨到轨输出摆幅。\n\n MAX517为单通道DAC，MAX518/MAX519为双通道DAC。MAX518使用电源电压作为两个DAC的基准电压。MAX517的单通道DAC具有基准输入，MAX519的两个DAC各自均具有自己的基准输入。\n\n MAX517/MAX518/MAX519具有串行接口和内部软件协议，支持以高达400kbps的数据速率进行通信。该接口与双缓冲输入配置相结合，允许双 • +5V单电源\n\n• 简单的2线串行接口\n\n• I²C 兼容\n\n• 输出缓冲放大器提供轨到轨摆幅\n\n• 节省空间的8引脚DIP/SO封装(MAX517/MAX518)\n\n• 基准输入范围包括两个供电轨(MAX517/MAX519)\n\n• 上电复位可清除所有锁存器\n\n• 4µA关断模式;

Dual, 10-Bit, 40MHz, Current/Voltage Simultaneous-Output DACs

General Description The MAX5180 contains two 10-bit, simultaneousupdate, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal sp

Dual, 10-Bit, 40MHz, Current/Voltage Simultaneous-Output DACs

General Description The MAX5180 contains two 10-bit, simultaneousupdate, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal sp

10-Bit, 40MHz, Current/Voltage-Output DACs

General Description The MAX5181 is a 10-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The MAX5184 pr

10位、40MHz、电流/电压输出DAC

MAX5181是一款10位、电流输出数模转换器(DAC)，可在需要在低失真和低功耗工作条件下进行模拟信号重构的信号重构或任意波形生成应用中提供优异性能。MAX5184提供相同的规格，具有用于电压输出操作的片内精密电阻。MAX5181/MAX5184专为10pV-s毛刺操作而设计，可有效地减少输出端的干扰杂散信号成分。板载1.2V带隙电路提供经过适当调节的低噪声基准电压源，可在进行外部基准电压源操作时禁用。\n\n 这些器件旨在以超低的功耗提供高水平的信号完整性。它们采用2.7V至3.3V单电源供电。此外，这些DAC具有三种工作模式：正常、低功耗待机和完全关断，可通过1µA（最大）关断 • 2.7V至3.3V单电源供电\n\n• 无杂散动态范围较宽：fOUT = 2.2MHz时为70dB\n\n• 全差分输出\n\n• 低电流待机或完全关断模式\n\n• 1.2V内部低噪声带隙基准电压源\n\n• 小型24引脚QSOP和薄型QFN封装;

10-Bit, 40MHz, Current/Voltage-Output DACs

General Description The MAX5181 is a 10-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The MAX5184 pr

双路、10位、40MHz、电流/电压输出DAC，输出交替更新

MAX5182是一款双通道、10位、交替相位更新、电流输出数模转换器(DAC)，可在需要在低失真和低功耗工作条件进行下模拟信号重构的系统中提供优异性能。MAX5185提供相同的规格，具有用于电压输出操作的片内输出电阻。两款器件专为10pV-s毛刺操作而设计，可减少失真并有效地减少输出端的干扰杂散信号成分。板载+1.2V带隙电路提供经过适当调节的低噪声基准电压源，可在进行外部基准电压源操作时禁用。\n\n MAX5182/MAX5185旨在以超低的功耗提供高水平的信号完整性。两个DAC均采用+2.7V至+3.3V单电源供电。此外，这些DAC具有三种工作模式：正常、低功耗待机和完全关断。 • +2.7V至+3.3V单电源供电\n• 无杂散动态范围较宽：fOUT = 2.2MHz时为70dB\n• 为每个DAC提供全差分输出\n• DAC输出之间存在±0.5% FSR增益失配\n• 低电流待机或完全关断模式\n• +1.2V内部低噪声带隙基准电压源\n• 小型28引脚QSOP封装;

Dual, 10-Bit, 40MHz, Current/Voltage Simultaneous-Output DACs

General Description The MAX5180 contains two 10-bit, simultaneousupdate, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal sp

10-Bit, 40MHz, Current/Voltage-Output DACs

General Description The MAX5181 is a 10-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The MAX5184 pr

10-Bit, 40MHz, Current/Voltage-Output DACs

General Description The MAX5181 is a 10-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The MAX5184 pr

Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs

General Description The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5189 provides equal sp

Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs

General Description The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5189 provides equal sp

Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs

General Description The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5189 provides equal sp

8-Bit, 40MHz, Current/Voltage-Output DACs

General Description The MAX5187 is an 8-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The voltage-

8-Bit, 40MHz, Current/Voltage-Output DACs

General Description The MAX5187 is an 8-bit, current-output digital-to-analog converter (DAC) designed for superior performance in signal reconstruction or arbitrary waveform generation applications requiring analog signal reconstruction with low distortion and low-power operation. The voltage-

Dual, 8-Bit, 40MHz, Current/Voltage, Alternate-Phase Output DACs

General Description The MAX5188 is a dual 8-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5191 provides equal specifications, w

Dual, 8-Bit, 40MHz, Current/Voltage, Alternate-Phase Output DACs

General Description The MAX5188 is a dual 8-bit, alternate-phase-update, current-output digital-to-analog converter (DAC) designed for superior performance in systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5191 provides equal specifications, w

Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs

General Description The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5189 provides equal sp

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

2-Wire Serial 8-Bit DACs with Rail-to-Rail Outputs

General Description The MAX517/MAX518/MAX519 are 8-bit voltage output digital-to-analog converters (DACs) with a simple 2-wire serial interface that allows communication between multiple devices. They operate from a single 5V supply and their internal precision buffers allow the DAC outputs to

封装/外壳：28-SSOP（0.154"，3.90mm 宽） 包装：管件 描述：IC DAC 10BIT A-OUT 28QSOP 集成电路（IC） 数模转换器（DAC）

封装/外壳：28-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：IC DAC 10BIT A-OUT 28QSOP 集成电路（IC） 数模转换器（DAC）

10-Bit, 40MHz, Current/Voltage-Output DACs

文件：221.1 Kbytes Page：16 Pages

10-Bit, 40MHz, Current/Voltage-Output DACs

文件：221.1 Kbytes Page：16 Pages

Dual, 10-Bit, 40MHz Current/Voltage Alternate-Phase Output DACs

文件：244.37 Kbytes Page：16 Pages

Dual, 10-Bit, 40MHz Current/Voltage Alternate-Phase Output DACs

文件：244.37 Kbytes Page：16 Pages

10-Bit, 40MHz, Current/Voltage-Output DACs

文件：221.1 Kbytes Page：16 Pages

10-Bit, 40MHz, Current/Voltage-Output DACs

文件：221.1 Kbytes Page：16 Pages

10-Bit, 40MHz, Current/Voltage-Output DACs

文件：221.1 Kbytes Page：16 Pages

Dual, 10-Bit, 40MHz Current/Voltage Alternate-Phase Output DACs

文件：244.37 Kbytes Page：16 Pages

8-Bit, 40MHz, Current/Voltage-Output DACs

文件：281.26 Kbytes Page：15 Pages

Dual, 8-Bit, 40MHz, Current/Voltage, Alternate-Phase Output DACs

文件：209.78 Kbytes Page：14 Pages

Silicon High Voltage Rectifier for TV Applications

Features: ● Small Size Molded Packaged ● Low Leakage

Numeric Display

文件：21.91 Kbytes Page：1 Pages

Numeric Display

文件：21.91 Kbytes Page：1 Pages

Numeric Display

文件：21.91 Kbytes Page：1 Pages

Numeric Display

文件：23.04 Kbytes Page：1 Pages