Overvoltage Protection Controllers with Status FLAG

General Description The MAX4838–MAX4841 are overvoltage protection ICs that protect low-voltage systems against voltages of up to 28V. If the input voltage exceeds the overvoltage trip level, the MAX4838–MAX4841 turn off the low-cost external N-channel FET(s) to prevent damage to the protected co

Power Assemblies

HEATSINKS Power Assemblies The current range of heatsinks is illustrated with a brief resumé of their characteristics. The products available are intended for use with all our power semiconductors - from the small stud base through to large disc devices and modules. All heatsinks are suitable f

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

NYLON M/F HEX STANDOFF

文件：230.74 Kbytes Page：1 Pages

Standard CMOS Voltage Detector IC

文件：269.09 Kbytes Page：10 Pages