Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

四路、满摆幅、故障保护、SPST模拟开关

MAX4511/MAX4512/MAX4513均为四通道、单刀单掷(SPST)、故障保护模拟开关。它们与行业标准的无保护DG201/DG202/DG213引脚兼容。这些新型开关为输入提供故障保护并具有轨到轨信号处理能力。常开(NO_)和常闭(NC_)端子在上电或关断期间受到保护，可防止高达36V的过压故障。在故障条件下，NO_或NC_端子变为开路，只有几纳安的漏电流从电源流出，但开关输出(COM_)向负载提供高达10mA的适当极性电源电压。这可以确保在故障开始和结束时提供明确的轨到轨输出。\n\n 导通电阻最大为175Ω，开关间匹配至10Ω（最大）。+25°C时关断漏电流仅为0.5n • 断电时提供±40V故障保护\n\n• 使用±15V电源时提供±36V故障保护\n\n• 电源关闭时所有开关断开\n\n• 轨到轨信号处理\n\n• 在故障条件下，输出箝位至适当的电源电压；无转换毛刺\n\n• 175Ω（最大值）信号路径，采用±15V电源\n\n• 无需电源时序控制\n\n• ±4.5V至±18V双电源供电\n\n• +9V至+36V单电源\n\n• 低功耗：< 2mW\n\n• 四个独立控制的SPST开关\n\n• 与行业标准DG411/DG412/DG413、DG201/DG202/DG213引脚兼容\n\n• TTL和CMOS逻辑兼容输入，采用+9V至+15V单电源或;

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

General Description The MAX4511/MAX4512/MAX4513 are quad, single-pole/single-throw (SPST), fault-protected analog switch es. They are pin-compatible with the industry-standard nonprotected DG201/DG202/DG213. These new switches feature fault-protected inputs and Rail-to-Rail® signal handling capab

Real time clock module(SERIAL-INTERFACE REAL TIME CLOCK MODULE)

• Builtin crystal unit allows adjustment-free efficient operation. • Using a serial interface, controllable only three signal lines. • Automatic leap year correction. • 30 second adjustment, available. • Wide operating voltage from 2.7V to 5.5V.

Real time clock module(SERIAL-INTERFACE REAL TIME CLOCK MODULE)

• Builtin crystal unit allows adjustment-free efficient operation. • Using a serial interface, controllable only three signal lines. • Automatic leap year correction. • 30 second adjustment, available. • Wide operating voltage from 2.7V to 5.5V.

SURFACE MOUNT SILICON ZENER DIODES

VZ : 2.7 - 200 Volts PD : 2 Watts FEATURES : * Complete Voltage Range 2.7 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free