Ultra-High-Speed, Low-Distortion, Differentialto- Single-Ended Line Receivers with Enable

General Description The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a single-ended output. They operate from ±5V supplies an

Ultra-High-Speed, Low-Distortion, Differentialto- Single-Ended Line Receivers with Enable

Features © 5000V/μs Slew Rate (MAX4444) © +2V/V Internally Fixed Gain (MAX4444) © External Gain Selection (MAX4445, AVCL ³ +2V/V) © 550MHz -3dB Bandwidth © -60dB SFDR at 5MHz © Low Differential Gain/Phase: 0.07%/0.05° © Low Noise: 25nV/ÃHz at fIN = 100kHz © Low-Power Disable Mode Redu

超高速、低失真、差分至单端线接收器，带有使能端

MAX4444/MAX4445差分线路接收器提供出色的高速、低失真性能。这些IC采用三运算放大器仪表放大器架构，具有对称差分输入和单端输出。它们采用±5V电源供电，能够将100Ω负载驱动至±3.7V。MAX4444在内部设置+2V/V的闭环增益，而MAX4445则通过外部电阻设置，针对+2V/V或更大的增益进行了补偿。低功耗使能模式可将电流消耗降至3.5mA。\n\n MAX4444/MAX4445采用电流反馈技术，可实现550MHz带宽，同时保持高达5000V/µs的压摆率。这些放大器具有出色的差分增益/相位和噪声规格，是各种视频和RF信号处理应用的适宜之选。评估套件有助于加速设计 • 5000V/µs压摆率(MAX4444)\n\n• +2V/V内部固定增益(MAX4444)\n\n• 外部增益选择（MAX4445，AVCL ≥ +2V/V）\n\n• -3dB带宽为550MHz\n\n• 5MHz时的SFDR为-60dB\n\n• 低差分增益/相位：0.07%/0.05°\n\n• 低噪声：fIN = 100kHz时为25nV/\n\n• 低功耗禁用模式将静态电流降至3.5mA;

Fully Assembled and Tested Surface-Mount Board

文件：97.63 Kbytes Page：4 Pages

Ultra-High-Speed, Low-Distortion, Differentialto- Single-Ended Line Receivers with Enable

General Description The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a single-ended output. They operate from ±5V supplies an

Ultra-High-Speed, Low-Distortion, Differentialto- Single-Ended Line Receivers with Enable

Features © 5000V/μs Slew Rate (MAX4444) © +2V/V Internally Fixed Gain (MAX4444) © External Gain Selection (MAX4445, AVCL ³ +2V/V) © 550MHz -3dB Bandwidth © -60dB SFDR at 5MHz © Low Differential Gain/Phase: 0.07%/0.05° © Low Noise: 25nV/ÃHz at fIN = 100kHz © Low-Power Disable Mode Redu

Fully Assembled and Tested Surface-Mount Board

文件：97.63 Kbytes Page：4 Pages

功能：缓冲器/接收器 包装：盒 描述：EVAL KIT MAX4444, MAX4445 开发板，套件，编程器 评估和演示板及套件

Transceiver for MIL-STD-1553 /MACAIR in a Chipscale Package

GENERAL DESCRIPTION The Aeroflex Laboratories transceiver model ACT4444 is a monolithic transceiver which provides full compliance with Macair and MIL-STD-1553 data bus requirements. The model ACT4444 performs the front-end analog function of inputting and outputting data through a transformer to

Transceiver for MIL-STD-1553 /MACAIR in a Chipscale Package

GENERAL DESCRIPTION The Aeroflex Laboratories transceiver model ACT4444 is a monolithic transceiver which provides full compliance with Macair and MIL-STD-1553 data bus requirements. The model ACT4444 performs the front-end analog function of inputting and outputting data through a transformer to

N-Channel Enhancement Mode Field Effect Transistor

General Description The AO4444 uses advanced trench technology to provide excellent RDS(ON), body diode characteristics and ultra-low gate resistance. This device is ideally suited for use as a low side switch in 12V buck converters. Standard Product AO4444 is Pb-free (meets ROHS & Sony 259 s