330mW、超小型、音频功率放大器，带有关断

MAX4366/MAX4367/MAX4368是桥式音频功率放大器，可用于具有内置扬声器和耳机的便携式设备。MAX4366/MAX4367/MAX4368工作于5V单电源时，能够向32Ω负载提供330mW的连续功率，或者向16Ω负载提供200mW的连续功率，并保持1%的THD+N。\n MAX4366/MAX4367/MAX4368的桥式输出不再需要输出耦合电容，使外部元件数量更少。MAX4366/MAX4367/MAX4368还具有低功耗关断模式，无咔嗒声上电/掉电和内部直流偏置产生电路。MAX4366为单位增益稳定、可设置增益的放大器。MAX4367/MAX4368具有内部预设的2 \n• 驱动330mW至32Ω负载(200mW至16Ω) \n• 1kHz时0.02% THD+N (120mW至32Ω) \n• 内部桥式结构 \n• 无需输出耦合电容 \n• 工作在2.3V至5.5V单电源下 \n• 2mA电源电流 \n• 低功率关断模式 \n• 上电与关断时无咔嗒声 \n• 热过载保护 \n• 备有TDFN和UCSP封装;

330mW, Ultra-Small, Audio Power Amplifiers with Shutdown

文件：494.97 Kbytes Page：18 Pages

PLL & HP-AMP DAC

GENERAL DESCRIPTION The AK4368 is 24-bit DAC with an integrated PLL and headphone amplifier. The PLL input frequency is synchronized to typical mobile phone clock frequencies. The AK4368 features an analog mixing circuit that allows easy interfacing in mobile phone and portable communication de

PLL & HP-AMP DAC

GENERAL DESCRIPTION The AK4368 is 24-bit DAC with an integrated PLL and headphone amplifier. The PLL input frequency is synchronized to typical mobile phone clock frequencies. The AK4368 features an analog mixing circuit that allows easy interfacing in mobile phone and portable communication de

Evaluation board Rev.1 for AK4368

GENERAL DESCRIPTION The AK4368 is 24-bit DAC with an integrated PLL and headphone amplifier. The PLL input frequency is synchronized to typical mobile phone clock frequencies. The AK4368 features an analog mixing circuit that allows easy interfacing in mobile phone and portable communication de

N-Channel Reduced Qg, Fast Switching WFET

文件：70.31 Kbytes Page：5 Pages