SOT23, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

General Description The MAX4249–MAX4257 low-noise, low-distortion operational amplifiers offer Rail-to-ail®outputs and single supply operation down to 2.4V. They draw only 400µA of quiescent supply current per amplifier while featuring ultra-low distortion (0.0002 THD), as well as low input vol

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

Features ● Available in Space-Saving UCSP, SOT23, and μMAX® Packages ● Low Distortion: 0.0002% THD (1kΩ load) ● 400μA Quiescent Supply Current per Amplifier ● Single-Supply Operation from 2.4V to 5.5V ● Input Common-Mode Voltage Range Includes Ground ● Outputs Swing Within 8mV of Rails

UCSP封装、单电源、低噪声、低失真、满摆幅运算放大器

MAX4249–MAX4257低噪声、低失真运算放大器提供轨到轨输出，采用低至2.4V的单电源供电。每个放大器的静态电源电流消耗为400µA，同时具有超低失真(0.0002% THD)以及低输入电压噪声密度(7.9nV/ )和低输入电流噪声密度(0.5fA/ )。这些特性使得这些器件非常适合用于需要低失真和/或低噪声的便携式/电池供电应用。\n\n 为了进一步省电，MAX4249/MAX4251/MAX4253/MAX4256提供低功耗关断模式，可将电源电流降至0.5µA，并将放大器的输出置于高阻抗状态。MAX4249–MAX4257提供轨到轨输出摆幅，其输入共模电压范围包括 • 采用节省空间的UCSP、SOT23和µMAX®封装\n\n• 低失真：0.0002%总谐波失真（1kΩ负载）\n\n• 静态电源电流：400µA（每个放大器）\n\n• 单电源供电：2.4V至5.5V\n\n• 输入共模电压范围包括地电压\n\n• 10kΩ负载时输出摆幅达供电轨的8mV范围内\n\n• 3MHz GBW积，单位增益稳定(MAX4250-MAX4254)\n\n• 22MHz GBW积，AV ≥ 10V/V时保持稳定(MAX4249/MAX4255/MAX4256/MAX4257)\n\n• 出色的直流特性\n• VOS = 70µV\n\n• IBIAS = 1p;

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

文件：1.37358 Mbytes Page：21 Pages

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

文件：738.28 Kbytes Page：16 Pages

丝印代码：AAK；UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

Features ● Available in Space-Saving UCSP, SOT23, and μMAX® Packages ● Low Distortion: 0.0002% THD (1kΩ load) ● 400μA Quiescent Supply Current per Amplifier ● Single-Supply Operation from 2.4V to 5.5V ● Input Common-Mode Voltage Range Includes Ground ● Outputs Swing Within 8mV of Rails

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

Features ● Available in Space-Saving UCSP, SOT23, and μMAX® Packages ● Low Distortion: 0.0002% THD (1kΩ load) ● 400μA Quiescent Supply Current per Amplifier ● Single-Supply Operation from 2.4V to 5.5V ● Input Common-Mode Voltage Range Includes Ground ● Outputs Swing Within 8mV of Rails

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

Features ● Available in Space-Saving UCSP, SOT23, and μMAX® Packages ● Low Distortion: 0.0002% THD (1kΩ load) ● 400μA Quiescent Supply Current per Amplifier ● Single-Supply Operation from 2.4V to 5.5V ● Input Common-Mode Voltage Range Includes Ground ● Outputs Swing Within 8mV of Rails

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

文件：738.28 Kbytes Page：16 Pages

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

文件：738.28 Kbytes Page：16 Pages

UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

文件：738.28 Kbytes Page：16 Pages

High Intensity Popular T-1 3/4diameter Package Selected minimun intensities General purpose leads Reliable and rugged

Features ◾ High intensity. ◾ Popular T-1 3/4 Diameter package. ◾ Selected minimum intensities. ◾ Wide viewing angle. ◾ General purpose leads. ◾ Reliable and rugged.

5 AMP, 55V, H-BRIDGE MOSFET BRUSHED MOTOR CONTROLLER

DESCRIPTION: The MSK 4253 is a complete H-bridge MOSFET Brushed Motor Control System in an electrically isolated hermetic package. The hybrid is capable of 5 amps of output current and 55 volts of DC bus voltage. It has the normal features for protecting the bridge. Included is all the bridge dri

5 AMP, 55V, H-BRIDGE MOSFET BRUSHED MOTOR CONTROLLER

DESCRIPTION: The MSK 4253 is a complete H-bridge MOSFET Brushed Motor Control System in an electrically isolated hermetic package. The hybrid is capable of 5 amps of output current and 55 volts of DC bus voltage. It has the normal features for protecting the bridge. Included is all the bridge dri

-48V Hot Swap Controller with Sequencer

文件：337.75 Kbytes Page：32 Pages