Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps

General Description The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V)

单/双/四路、微功耗、单电源、满摆幅运算放大器

单运放MAX4091，双运放MAX4092及四运放MAX4094兼有优异的DC精度与满摆幅输入和输出。由于其共模电压范围为VCC至VEE，所以器件既可以单电源工作(2.7V至6V)，也可以双电源工作(±1.35V至±3V)。每路运放仅需不足130µA的电流。即使在这样低的电流下，这些运放也可以驱动1kΩ负载，并且等效输入电压噪声仅为12nV/√Hz。另外，这些运放可以驱动超过2000pF的负载。\n\n MAX4091/MAX4092/MAX4094的高精度，加之其很宽的输入输出动态范围，低电压、单电源工作以及非常低的供电电流，使其成为电池供电设备、工业领域和数据采集及控制应用等的理 • 低电压、单电源工作(2.7V至6V)\n• 输入过驱动时无相位反转\n• 1kΩ负载时输出可达满摆幅\n• 每运放的最大静态电流为165µA\n• 电压增益高(115dB)\n• 工作温度范围(-40°C至+125°C);

Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps

General Description The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V)

Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps

General Description The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V)

Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps

General Description The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V)

Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps

General Description The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V)

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • High reliability, achieved by the DHD structure • Allowing to insert to a 5 mm pitch hole • Finely divided zener-voltage rank • Sharp rising performance • Wide voltage range: VZ = 2.0 V to 39 V

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • Extremely low noise voltage caused from diode (1/3 to 1/10 of our conventional MAZ4000 series) • Extremely good rising performance (in the low-current range) • Easy-to-identify the zener-voltage rank by the color bands • Easy

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • Extremely low noise voltage caused from diode (1/3 to 1/10 of our conventional MAZ4000 series) • Extremely good rising performance (in the low-current range) • Easy-to-identify the zener-voltage rank by the color bands • Easy

J-FET INPUT LOW-OFFSET OPERATIONAL AMPLIFIER

The µPC4091 operational amplifier offers high input impedance, low offset voltage, high slew rate, and stable AC operating characteristics. NECs unique high-speed PNP transistor (fT = 300 MHz) in the output stage solves the oscillation problem of current sinking with a large capacitive load. Zener

J-FET INPUT LOW-OFFSET OPERATIONAL AMPLIFIER

The µPC4091 operational amplifier offers high input impedance, low offset voltage, high slew rate, and stable AC operating characteristics. NECs unique high-speed PNP transistor (fT = 300 MHz) in the output stage solves the oscillation problem of current sinking with a large capacitive load. Zener