Micropower, SOT23, Rail-to-Rail, Fixed-Gain, GainAmp/Open-Loop Op Amps

General Description The MAX4074–MAX4078 GainAmp™ op amp family combines low-cost Rail-to-Rail® op amps with precision internal gain-setting resistors. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1 gain accuracy. Fixed inverting gains from -0.25V/V to -1

BCD RATE MULTIPLEXER

DESCRIPTION The HCC4527B (extended temperature range) and HCF4527B (intermediate temperature range) are monolithic integrated circuit, available in 16-lead dual in line plastic or ceramic package. ■ CASCADABLE IN MULTIPLES OF 4-BITS ■ SET TO 9 INPUT AND 9 DETECT OUTPUT ■ QUIESCENT CURRENT SPEC

4 BIT D TYPE REGISTERS

DESCRIPTION The HCC4076B (extended temperature range) and HCC4076B (intermediate temperature range) are monolithic integrated circuit, available in 16 lead dual in line plastic or ceramic package and plastic micropackage. ■ THREE STATE OUTPUTS ■ INPUT DISABLE WITHOUT GATING THE CLOCK

4 BIT D TYPE REGISTERS

DESCRIPTION The HCC4076B (extended temperature range) and HCC4076B (intermediate temperature range) are monolithic integrated circuit, available in 16 lead dual in line plastic or ceramic package and plastic micropackage. ■ THREE STATE OUTPUTS ■ INPUT DISABLE WITHOUT GATING THE CLOCK

BCD RATE MULTIPLEXER

DESCRIPTION The HCC4527B (extended temperature range) and HCF4527B (intermediate temperature range) are monolithic integrated circuit, available in 16-lead dual in line plastic or ceramic package. ■ CASCADABLE IN MULTIPLES OF 4-BITS ■ SET TO 9 INPUT AND 9 DETECT OUTPUT ■ QUIESCENT CURRENT SPEC

Quadruple D-type register with 3-state outputs

DESCRIPTION The HEF4076B is a quadruple edge-triggered D-type flip-flop with four data inputs (D0to D3), two active LOW data enable inputs (ED0andED1), a common clock input (CP), four 3-state outputs (O0to O3), two active LOW output enable inputs (EO0andEO1), and an overriding asynchronous mast