Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

General Description The single MAX4036/MAX4037 and dual MAX4038/MAX4039 operational amplifiers operate from a single +1.4V to +3.6V (without reference) or +1.8V to +3.6V (with reference) supply and consume only 800nA of supply current per amplifier, and 1.1µA for the optional reference. The MAX40

低IBIAS、+1.4V/800nA、满摆幅运算放大器，带有+1.2V缓冲基准

MAX4036/MAX4037单路运算放大器和MAX4038/MAX4039双路运算放大器工作于+1.4V至+3.6V (无基准电压)或+1.8V至+3.6V (带基准电压)的单电源，且每个放大器的电源电流消耗仅为800nA，可选基准电源消耗为1.1µA。在VDD = 1.4V工作电源下，MAX4036/MAX4038的共模输入电压范围从0V至VDD - 0.4V。MAX4037/MAX4039具有1.232V的电压基准，具有100µA的源出电流和20µA的吸收电流能力。\n\n MAX4036–MAX4039的满摆幅输出可驱动5kΩ负载在电源25mV的摆幅内。极低的电源电流、低工作 • 每个放大器极低的800nA电源电流\n• 极低的1.4V工作电源电压(对于MAX4037/MAX4039为1.8V)\n• 满摆幅输出驱动5kΩ和5000pF负载\n• 1.232V ±0.5%、120ppm/°C (最大值)的电压基准(MAX4037/MAX4039)\n• 无需外部基准旁路电容\n• 过驱动输入时无相位翻转\n• 1.0pA (典型)的低输入偏置电流\n• 200µV的低输入失调电压\n• 单位增益稳定\n• 采用微小的UCSP、SC70、SOT23、TDFN或µMAX封装\n• 可工作在-40°C至+125°C温度范围(MAX4036A/MAX4038A);

Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

文件：616.23 Kbytes Page：22 Pages

Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

General Description The single MAX4036/MAX4037 and dual MAX4038/MAX4039 operational amplifiers operate from a single +1.4V to +3.6V (without reference) or +1.8V to +3.6V (with reference) supply and consume only 800nA of supply current per amplifier, and 1.1µA for the optional reference. The MAX40

Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

General Description The single MAX4036/MAX4037 and dual MAX4038/MAX4039 operational amplifiers operate from a single +1.4V to +3.6V (without reference) or +1.8V to +3.6V (with reference) supply and consume only 800nA of supply current per amplifier, and 1.1µA for the optional reference. The MAX40

Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

General Description The single MAX4036/MAX4037 and dual MAX4038/MAX4039 operational amplifiers operate from a single +1.4V to +3.6V (without reference) or +1.8V to +3.6V (with reference) supply and consume only 800nA of supply current per amplifier, and 1.1µA for the optional reference. The MAX40

Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

文件：616.23 Kbytes Page：22 Pages

Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

文件：616.23 Kbytes Page：22 Pages

Low IBIAS, 1.4V/800nA, Rail-to-Rail Op Amps with 1.2V Buffered Reference

文件：616.23 Kbytes Page：22 Pages

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • High reliability, achieved by the DHD structure • Allowing to insert to a 5 mm pitch hole • Finely divided zener-voltage rank • Sharp rising performance • Wide voltage range: VZ = 2.0 V to 39 V

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • High reliability, achieved by the DHD structure • Allowing to insert to a 5 mm pitch hole • Finely divided zener-voltage rank • Sharp rising performance • Wide voltage range: VZ = 2.0 V to 39 V

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • High reliability, achieved by the DHD structure • Allowing to insert to a 5 mm pitch hole • Finely divided zener-voltage rank • Sharp rising performance • Wide voltage range: VZ = 2.0 V to 39 V

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • High reliability, achieved by the DHD structure • Allowing to insert to a 5 mm pitch hole • Finely divided zener-voltage rank • Sharp rising performance • Wide voltage range: VZ = 2.0 V to 39 V