双通道nanoPower运算放大器，采用微小尺寸WLP和TDFN封装

MAX40018为双通道运算放大器，耗流仅为400nA(每通道)。器件功耗如此之低，是便携式医疗设备、便携式仪表和无线电话等电池供电应用的理想选择。\n\n MAX40018采用1.7V至5.5V单电源供电，与微控制器的1.8V、2.5V或3.3V标称供电电源相同。MAX40018提供满摆幅输出、单位增益稳定、增益带宽乘积(GBP)为9kHz。\n\n 超低耗流、超低输入偏置电流、低工作电压及满摆幅输出使得这款双通道运算放大器非常适合单节锂离子(Li+)、两节镍镉或碱性电池供电系统。 \n\n MAX40018采用微小尺寸、8焊球、1.63mm x 0.91mm、 • 超低功耗延长电池寿命 \n• 400nA典型耗流(每通道) \n\n\n• 1.7V至5.5V单电源供电 \n• 器件可由1.8V/2.5V/3.3V/5V等同一的系统电源供电 \n\n\n• 微小封装节省电路板空间 \n• 1.63mm x 0.91mm x 0.5mm WLP-8封装，焊球间距为0.4mm \n• 3mm x 3mm x 0.75mm TDFN-8封装 \n\n\n• 高精度指标，适用于缓冲器/滤波器/增益级设计 \n• 350μV低输入失调电压 \n• 满摆幅输出电压 \n• 9kHz GBP \n• 0.1pA低输入偏置电流 \n• 单位增益稳定 \n\n\n• -;

Dual nanoPower Op Amps in Tiny WLP and TDFN Packages

文件：528.55 Kbytes Page：13 Pages

Accommodates Multiple Op-Amp Configurations

文件：935.85 Kbytes Page：8 Pages

Dual nanoPower Op Amps in Tiny WLP and TDFN Packages

文件：528.55 Kbytes Page：13 Pages

Dual nanoPower Op Amps in Tiny WLP and TDFN Packages

文件：528.55 Kbytes Page：13 Pages

Accommodates Multiple Op-Amp Configurations

文件：935.85 Kbytes Page：8 Pages

包装：盒 描述：EVAL BOARD FOR MAX40018 开发板，套件，编程器 评估板 - 运算放大器

Accommodates Multiple Op-Amp Configurations

文件：935.85 Kbytes Page：8 Pages

READ-ONLY CONTACTLESS IDENTIFICATION DEVICE

Description The H4001 is a CMOS integrated circuit for use in transponders. The circuit is powered by an external coil placed in a magnetic field, and gets its clock from the same field via one of the coil terminals. The other coil terminal is affected by the modulator, turning on and off the mod

READ-ONLY CONTACTLESS IDENTIFICATION DEVICE

Description The H4001 is a CMOS integrated circuit for use in transponders. The circuit is powered by an external coil placed in a magnetic field, and gets its clock from the same field via one of the coil terminals. The other coil terminal is affected by the modulator, turning on and off the mod

Three-Phase Bridge Rectifier

文件：666.2 Kbytes Page：3 Pages

SEMIPACK짰 4 Thyristor Modules

文件：425.34 Kbytes Page：4 Pages