Signal-Line Circuit Protectors

General Description The MAX366 and MAX367 are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages. Features ♦ ±40V Overvoltage Protection ♦ O

Silicon NPN Transistor RF Power Amplifier PO = 45W @ 512MHz

Description: The NTE367 is a silicon NPN RF power transistor in a W65 type package designed for 12.5V UHF large–signal amplifier applications in industrial and commercial FM equipment operating to 512MHz. Features: ● Specified 12.5V, 470MHz Characteristics: Output Power: 45W Minimum G

Low Input Current Type Photocoupler

■ Features 1. Low input current type (IF=0.5mA) 2. High resistance to noise due to high common mode rejection voltage (CMR:MIN. 10kV/µs) 3. Mini-flat package 4. Isolation voltage (Viso:3 750Vrms) 5. Recognized by UL, file No. 64380 ■ Applications 1. Programmable controllers 2. Facsimil

Low Input Current Type Photocoupler

■ Features 1. Low input current type (IF=0.5mA) 2. High resistance to noise due to high common mode rejection voltage (CMR:MIN. 10kV/µs) 3. Mini-flat package 4. Isolation voltage (Viso:3 750Vrms) 5. Recognized by UL, file No. 64380 ■ Applications 1. Programmable controllers 2. Facsimil

0.36 inch ( 9.14 mm ) SINGLE DIGIT NUMERIC LED DISPLAYS

DESCRIPTION The UVS-360/367 is 0.36 inch (9.14mm) height single digit display. Choices of five colors-high efficiency red/bright red/green/yellow/red orange. High efficirncy red and bright red displays have red face and red segments. Green,yellow and red orange displays have gray face and whit

HEX BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

文件：341.33 Kbytes Page：14 Pages