Quad, SPST, Ultra-Low Leakage, CMOS Analog Switches

四路SPST、超低泄漏、CMOS模拟开关

1GHz Transimpedance Preamplifier with 25dB Dynamic Range

General Description The MAX3260 high-speed transimpedance amplifier is ideally suited for Fibre Channel and SDH/SONET applications. An extended dynamic range makes the MAX3260 useful in optical receiver systems with as much as 25dB of input signal range. A DC-restore feed back network prevents a

健康测量微控制器

MAX32600微控制器基于行业标准ARM® Cortex®-M3 32位RISC CPU，工作在高达24MHz。器件包括256KB闪存、32KB SRAM、2KB指令缓存，以及集成的高性能模拟外设。\nMAX32600采用以下封装：192焊球、12mm x 12mm CTBGA；120焊球、7mm x 7mm CTBGA；108焊球、5.4mm x 4.3mm WLP。\n除Maxim提供的免费工具之外，MAX32600也支持IAR的Embedded Workbench。IAR Embedded Workbench®将编译器、汇编器、链接器和调试器集成在一个IDE中，简单易用，提供高级和高效 • 集成AFE支持以最少的分立式元件进行高精度健康测量\n• 高达500ksps转换速率\n• 差分8:1或单端16:1输入复用器\n• 内部或外部电压基准\n• 两个12位DAC和两个8位DAC \n• 四个低功耗比较器 \n• 四个接地开关 \n• 内置温度传感器 \n• 信赖保护单元，保证端对端安全 \n• 用于ECDSA和RSA的µMAA \n• 快速擦除SRAM，用于密钥存储 \n• 从缓存执行代码时，有功功率为175μA/MHz \n• LP1模式下，数据保持时的耗流仅为1.8µA，15µs快速唤醒 \n• 6通道DMA引擎支持微控制器处于休眠模式下的智能外设操作 \n• 1;

支持MAX32600的ARM mbed开发平台

MAX32600MBED提供一个便利的平台，用于评估MAX32600微控制器。MAX32600MBED同样提供了一个完整的、实用的系统，适用于开发和调试应用。 MAX32600MBED包括一个MAX32600 Cortex®-M3微控制器、便于访问高精度模拟前端(AFE)连接的原型区域、通过Arduino™兼容连接器访问的I/O、通过100mil x 100mil连接 头访问的I/O、USB接口，以及其它通用I/O器件。 关于开发的入门信息，请访问网站mbed.org上的MAX32600MBED平台页面。 \n• 板载ARM® mbed™硬件开发套件(HDK)接口，可快速连接至Toolchains \n• Arduino兼容连接器，便于连接已有组件板 \n• 原型区域允许靠近高精度AFE I/O构建用户电路 \n• 通用按钮开关和LED允许板载触觉和视觉交互 \n• 2 x 6连接头上的串行外设接口(SPI)和内部IC总线(I2C)方便连接至已有评估模块 \n• USB Micro-B连接至MAX32600 USB设备控制器，提供12Mbps用户数据通道;

1GHz Transimpedance Preamplifier with 25dB Dynamic Range

General Description The MAX3260 high-speed transimpedance amplifier is ideally suited for Fibre Channel and SDH/SONET applications. An extended dynamic range makes the MAX3260 useful in optical receiver systems with as much as 25dB of input signal range. A DC-restore feed back network prevents a

1GHz Transimpedance Preamplifier with 25dB Dynamic Range

General Description The MAX3260 high-speed transimpedance amplifier is ideally suited for Fibre Channel and SDH/SONET applications. An extended dynamic range makes the MAX3260 useful in optical receiver systems with as much as 25dB of input signal range. A DC-restore feed back network prevents a

Single 5V, Fully Integrated, 1.25Gbps Laser Diode Driver

General Description The MAX3261 is a complete, easy-to-program, single +5V-powered, 1.25Gbps laser diode driver with com plementary enable inputs and automatic power control (APC). The MAX3261 accepts differential PECL inputs and provides complementary output currents. A temperature-stabilized re

Single 5V, Fully Integrated, 1.25Gbps Laser Diode Driver

General Description The MAX3261 is a complete, easy-to-program, single +5V-powered, 1.25Gbps laser diode driver with com plementary enable inputs and automatic power control (APC). The MAX3261 accepts differential PECL inputs and provides complementary output currents. A temperature-stabilized re

Single 5V, Fully Integrated, 1.25Gbps Laser Diode Driver

General Description The MAX3261 is a complete, easy-to-program, single +5V-powered, 1.25Gbps laser diode driver with com plementary enable inputs and automatic power control (APC). The MAX3261 accepts differential PECL inputs and provides complementary output currents. A temperature-stabilized re

Single 5V, Fully Integrated, 1.25Gbps Laser Diode Driver

General Description The MAX3261 is a complete, easy-to-program, single +5V-powered, 1.25Gbps laser diode driver with com plementary enable inputs and automatic power control (APC). The MAX3261 accepts differential PECL inputs and provides complementary output currents. A temperature-stabilized re

Single 5V, Fully Integrated, 1.25Gbps Laser Diode Driver

General Description The MAX3261 is a complete, easy-to-program, single +5V-powered, 1.25Gbps laser diode driver with com plementary enable inputs and automatic power control (APC). The MAX3261 accepts differential PECL inputs and provides complementary output currents. A temperature-stabilized re

Single 5V, Fully Integrated, 155Mbps Laser Diode Driver

General Description The MAX3262 limiting amplifier with its high gain and wide bandwidth is ideal for use as a post amplifier in fiber-optic receivers with data rates up to 1Gbps. The amplifier’s gain can be adjusted between 33dB and 48dB. At maximum gain, signals as small as 6mVp-p can be amplif

High-Efficiency Microcontroller for Wearable Devices

General Description The MAX32625/MAX32626 is an ARM® Cortex®-M4F 32-bit microcontroller with an unconnected point unit, ideal for the emerging category of wearable medical and fitness applications. The architecture combines ultra-low power, high-efficiency signal processing functionality and ease

High-Efficiency Microcontroller for Wearable Devices

General Description The MAX32625/MAX32626 is an ARM® Cortex®-M4F 32-bit microcontroller with an unconnected point unit, ideal for the emerging category of wearable medical and fitness applications. The architecture combines ultra-low power, high-efficiency signal processing functionality and ease

High-Efficiency Microcontroller for Wearable Devices

General Description The MAX32625/MAX32626 is an ARM® Cortex®-M4F 32-bit microcontroller with an unconnected point unit, ideal for the emerging category of wearable medical and fitness applications. The architecture combines ultra-low power, high-efficiency signal processing functionality and ease

High-Efficiency Microcontroller for Wearable Devices

General Description The MAX32625/MAX32626 is an ARM® Cortex®-M4F 32-bit microcontroller with an unconnected point unit, ideal for the emerging category of wearable medical and fitness applications. The architecture combines ultra-low power, high-efficiency signal processing functionality and ease

High-Efficiency Microcontroller for Wearable Devices

General Description The MAX32625/MAX32626 is an ARM® Cortex®-M4F 32-bit microcontroller with an unconnected point unit, ideal for the emerging category of wearable medical and fitness applications. The architecture combines ultra-low power, high-efficiency signal processing functionality and ease

Single 5V, Fully Integrated, 155Mbps Laser Diode Driver

General Description The MAX3262 limiting amplifier with its high gain and wide bandwidth is ideal for use as a post amplifier in fiber-optic receivers with data rates up to 1Gbps. The amplifier’s gain can be adjusted between 33dB and 48dB. At maximum gain, signals as small as 6mVp-p can be amplif

Single 5V, Fully Integrated, 155Mbps Laser Diode Driver

General Description The MAX3262 limiting amplifier with its high gain and wide bandwidth is ideal for use as a post amplifier in fiber-optic receivers with data rates up to 1Gbps. The amplifier’s gain can be adjusted between 33dB and 48dB. At maximum gain, signals as small as 6mVp-p can be amplif

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

Ultra-Low-Power Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 3MB Flash and 1MB SRAM

General Description DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power tec

Ultra-Low-Power Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 3MB Flash and 1MB SRAM

General Description DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power tec

Ultra-Low-Power Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 3MB Flash and 1MB SRAM

General Description DARWIN is a new breed of low-power microcontrollers built to thrive in the rapidly evolving Internet of Things (IoT). They are smart, with the biggest memories in their class and a massively scalable memory architecture. They run forever, thanks to wearable-grade power tec

Low-Power, Arm Cortex-M4 Processor with FPU-Based Microcontroller and Bluetooth 5.2

General Description The MAX32655 microcontroller (MCU) is an advanced system-on-chip (SoC) featuring an Arm® Cortex®-M4F CPU for efficient computation of complex functions and algorithms that is qualified to operate at a temperature range of -40°C to +105°C. The SoC integrates power regulatio

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

Arm Cortex-M4 Processor with FPU-Based Microcontroller (MCU) with 256KB Flash and 80KB SRAM

General Description In the DARWIN family, the MAX32662 is an ultra-low-power, cost-effective, highly integrated 32-bit microcontroller designed for small battery-powered devices. It combines a flexible peripheral and feature mix with the powerful Arm® Cortex®-M4 processor with floating point unit

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

Ultra-Low-Power Arm Cortex-M4F with Precision Analog Front-End and HART for Industrial and Medical Sensors

Features ●Low-Power, High-Performance for IndustrialApplications •12MHz Arm Cortex-M4 with FPU •384KB (376KB User) Flash Memory •160KB SRAM (128KB with ECC Enabled) •Optionally Retained in Low-Power Modes •ACTIVE Current (IDD_ACTS) ≤ 2.1mA at TA = +85°C •Ideal for 4-20mA Current Sense Loops

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

1.25Gbps/2.5Gbps, 3V to 5.5V, Low-Noise Transimpedance Preamplifiers for LANs

General Description The MAX3266 is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers. The circuit features 200nA input-referred noise, 920MHz bandwidth, and 1mA input overload. The MAX3267 provides a pin-for-pin compatible solution for communications up to

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

3.0V to 5.5V, 1.25Gbps/2.5Gbps Limiting Amplifiers

General Description The 1.25Gbps MAX3264/MAX3268/MAX3768 and the 2.5Gbps MAX3265/MAX3269/MAX3765 limiting amplifiers are designed for Gigabit Ethernet and Fibre Channel optical receiver systems. The amplifiers accept a wide range of input voltages and provide constant level output voltages with c

Arm Cortex-M4 with FPU Microcontroller and Bluetooth LE 5 for Industrial and Wearables

Benefits and Features ● Ultra-Efficient Microcontroller for Battery-Powered Applications • 120MHz Arm Cortex-M4 Processor with FPU • Ultra-Low-Power, 32-Bit RISC-V (RV32) Coprocessor Available to Offload Data Processing • 7.3728MHz and 60MHz Low-Power Oscillators • External Crystal Support

Arm Cortex-M4 with FPU Microcontroller and Bluetooth LE 5 for Industrial and Wearables

Benefits and Features ● Ultra-Efficient Microcontroller for Battery-Powered Applications • 120MHz Arm Cortex-M4 Processor with FPU • Ultra-Low-Power, 32-Bit RISC-V (RV32) Coprocessor Available to Offload Data Processing • 7.3728MHz and 60MHz Low-Power Oscillators • External Crystal Support

Arm Cortex-M4 with FPU Microcontroller and Bluetooth LE 5 for Industrial and Wearables

Benefits and Features ● Ultra-Efficient Microcontroller for Battery-Powered Applications • 120MHz Arm Cortex-M4 Processor with FPU • Ultra-Low-Power, 32-Bit RISC-V (RV32) Coprocessor Available to Offload Data Processing • 7.3728MHz and 60MHz Low-Power Oscillators • External Crystal Support

Arm Cortex-M4 with FPU Microcontroller and Bluetooth LE 5 for Industrial and Wearables

Benefits and Features ● Ultra-Efficient Microcontroller for Battery-Powered Applications • 120MHz Arm Cortex-M4 Processor with FPU • Ultra-Low-Power, 32-Bit RISC-V (RV32) Coprocessor Available to Offload Data Processing • 7.3728MHz and 60MHz Low-Power Oscillators • External Crystal Support