짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

±15kV ESD保护、32Mbps、3V/5V、三路RS-422/RS-485接收器，带有故障检测

MAX3097E/MAX3098E集成了三个带故障检测电路和故障状态输出的高速RS-485/RS-422接收器。接收器的输入具有故障阈值，可检测到器件未处于有效状态的情况。\n\n MAX3097E/MAX3098E会指示接收器输入处于开路状况、短路状况或超出共模范围的情况。当差分输入电压低于预设阈值时，它们也会生成故障指示。有关阈值的信息，请参阅完整数据手册中的订购信息或电气特性。\n\n 故障电路包含一个通过容器编程的延迟，以确保即使在低边沿速率下也不会出现错误的故障条件。每个接收器都能够以高达32Mbps的速率接收数据。\n\n   • 检测以下RS-485故障：\n• 开路状况\n\n• 短路状况\n\n• 低差分电压信号\n\n• 违反共模范围\n\n\n\n\n• ESD保护\n• ±15kV——人体模型\n\n• ±15kV——IEC 1000-4-2，气隙放电方法\n\n• ±8kV——IEC 1000-4-2，接触放电方法\n\n\n\n\n• +3V至+5.5V单电源供电\n\n• 扩展共模范围：-10V至+13.2V\n\n• 通过电容编程的故障指示延迟可在低数据速率下实现无误差操作\n\n• 独立的通用故障输出\n\n• 32Mbps数据速率\n\n• 16引脚QSOP比行业标准26LS31/32解决方案;

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. Features ♦Detects the Following RS-485 Fa

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

文件：1.59843 Mbytes Page：13 Pages

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

文件：1.59843 Mbytes Page：13 Pages

封装/外壳：16-SSOP（0.154"，3.90mm 宽） 包装：管件 描述：IC RECEIVER 0/3 16QSOP 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：16-SSOP（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC RECEIVER 0/3 16QSOP 集成电路（IC） 驱动器，接收器，收发器

짹15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection

文件：1.59843 Mbytes Page：13 Pages

Optoisolator Zero Crossing TRIAC Driver

Description: The NTE3097 is an optoisolator in a 6–Lead DIP type package and contains a gallium arsenide IRED optically coupled to a monolithic silicon detector performing the function of a Zero Voltage Crossing bilateral TRIAC Driver. This device is designed for use with a TRIAC in the i