Programmable DTE/DCE, 5V RS-232 Transceiver

General Description The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where 3 drivers and 5 receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-23

可编程DTE/DCE、+5V、RS-232收发器

MAX214 +5V RS-232收发器提供完整的8线、软件可配置、DTE或DCE端口RS-232接口。可以使用DTE/DCE控制引脚将Tx、Rx、RTS、CTS、DTR、DSR、DCD和RI电路配置为数据终端设备(DTE)或数据电路终端设备(DCE)。在DTE和DCE配置之间切换时，MAX214无需更换电缆。\n\n   • 无需零调制解调器电缆\n\n• 可编程DTE或DCE串行端口\n\n• 1µF电荷泵电容\n\n• 支持116kbps数据速率\n\n• 20µA（关断模式）\n\n• 接收器在关断模式下有效;

完备的SDARS接收器

MAX2140是一款完备的接收器，用于卫星数字音频广播服务(SDARS)。器件包含一个完全集成的VCO，仅需一个IF SAW和一个用于产生基准频率的晶振。\n为了构建一个完整的SDARS接收装置，MAX2140只需一个能够由基带控制器控制的低噪声放大器(LNA)。少量的外部元件需求，使得基于MAX2140的平台能够提供一种成本最低、尺寸最小的SDARS方案。\n接收器包含一个RF AGC环路和由基带控制的IF AGC环路，系统动态范围高于92dB。\n信道选择功能可由SAW滤波器和片上集成低通滤波器提供。\nN分频PLL具有很小的频率调节间隔，使得实现AFC环路成为可能。此外，参考试种由外部X • 集成接收器，仅需要一个SAW滤波器 \n• 独立的RF AGC环路 \n• 差分I/Q接口 \n• 完全集成的频率发生器 \n• 外部LNA的偏置电源 \n• 过流保护 \n• 低功耗待机模式 \n• 超小尺寸44引脚薄型QFN封装;

低功耗XM卫星通信接收机

MAX2141是一款完备的低功耗接收器，用于XM卫星接收系统。MAX2141仅需一个有源天线模块、一个晶体和SAW滤波器即可组成完整的XM接收机。MAX2141平台所需的外部元件极少，因而能够提供成本最低、尺寸最小的宽频接收器方案。\n 接收器包含独立的RF AGC环路和IF AGC环路，可有效提供大于92dB的动态范围。通过SAW滤波器和片内低通滤波器可实现信道选择。集成的分数N分频合成器允许很小的频率调节步长，使软件AFC环路实现成为可能。此外还提供基准缓冲器用于驱动基带控制器。\n 可通过I²C兼容总线接口编程MAX2141，提供可编程增益、可变带宽低通滤波器调谐以及多种掉电模式等特性。 \n• 与MAX2140引脚兼容 \n• 独立的RF AGC环路 \n• 独立的IF AGC环路 \n• +2.85V至+3.6V工作电压范围 \n• 完全集成的频率发生器 \n• 外部LNA的过流保护 \n• 低功耗待机模式 \n• 超小尺寸44引脚TQFN封装 \n• 功耗为250mW (VCC = +3.0V时);

Programmable DTE/DCE, 5V RS-232 Transceiver

General Description The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where 3 drivers and 5 receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-23

Programmable DTE/DCE, 5V RS-232 Transceiver

General Description The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where 3 drivers and 5 receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-23

Programmable DTE/DCE, 5V RS-232 Transceiver

General Description The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where 3 drivers and 5 receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-23

Programmable DTE/DCE, 5V RS-232 Transceiver

General Description The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where 3 drivers and 5 receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-23

Programmable DTE/DCE, 5V RS-232 Transceiver

General Description The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where 3 drivers and 5 receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-23

Programmable DTE/DCE, 5V RS-232 Transceiver

General Description The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where 3 drivers and 5 receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-23

Complete SDARS Receiver

文件：206.34 Kbytes Page：13 Pages

Complete SDARS Receiver

文件：162.98 Kbytes Page：12 Pages

Complete SDARS Receiver

文件：206.34 Kbytes Page：13 Pages

Evaluation Kit

文件：797.23 Kbytes Page：8 Pages

Complete SDARS Receiver

文件：1.05336 Mbytes Page：15 Pages

Complete SDARS Receiver

文件：206.34 Kbytes Page：13 Pages

Complete SDARS Receiver

文件：162.98 Kbytes Page：12 Pages

Complete SDARS Receiver

文件：1.05336 Mbytes Page：15 Pages

Complete SDARS Receiver

文件：1.05336 Mbytes Page：15 Pages

Complete SDARS Receiver

文件：206.34 Kbytes Page：13 Pages

封装/外壳：44-WFQFN 裸露焊盘 包装：卷带（TR） 描述：RF RECEIVER 2.4GHZ 44TQFN RF/IF，射频/中频和 RFID 射频接收器

包装：盒 描述：EVAL KIT MAX2140 开发板，套件，编程器 射频评估和开发套件，开发板

Evaluation Kit

文件：797.23 Kbytes Page：8 Pages

CCD Video Camera Signal Processor ICs

■ Overview The AN2145NFHP is a CCD video camera signal processor IC for 510H CCD. It incorporates full chroma signal LPFs and horizontal aperture correction circuits. Because carrier-balance is rationalized and ajustment-free, adjustments and necessary external components are reduced half in numb

Amlifier Transistors (PNP)

Amplifier Transistors PNP Silicon

LOW DROP POWER SCHOTTKY RECTIFIER

Description Schottky rectifiers designed for high frequency miniature switched mode power supplies such as adaptors and on board DC/DC converters. Packaged in SMA or SMB, the STPS1L30 is ideal for use in parallel with MOSFETs in synchronous rectification. Features • Very low forward voltage dr

Silicon NPN Transistor Darlington Driver

Description: The NTE214 is a silicon NPN Darlington transistor in a TO3P type package. Typical applications include motor drivers, printer hammer drivers, relay drivers, regulated DC power supply controllers. Features: • High DC Current Gain • Large Current Capacity and Wide ASO •

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE