5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

+5V、RS-232收发器，0.1µF外部电容

MAX200-MAX209、MAX211和MAX213是一个RS-232和V.28收发器系列，集成了电荷泵电路，通过+5V单电源供电。\n\n 根据EIA/TIA-232E规范加载时，这些驱动器在超过120kbps的数据速率下保持±5V EIA/TIA-232E输出信号电平。\n\n MAX211和MAX213采用28引脚宽体小型(SO)封装和28引脚紧缩小型(SSOP)封装，后者仅占SO面积的40%。MAX207采用24引脚SO和24引脚SSOP封装。MAX203和MAX205不使用外部元件，推荐用于电路板空间有限的应用。\n\n   • 节省电路板空间\n• 集成电荷泵电路\n• 无需双极性±12V电源\n\n• 支持单电源供电：+5V或9V至+12V\n\n\n\n\n• 集成0.1μF电容（MAX203、MAX205）\n\n• 24引脚SSOP封装与SO封装相比可节省多达40%的空间\n\n\n\n\n• 省电，可延长电池运行时间\n• 5µW关断模式（MAX200、MAX205、MAX206、MAX211）\n\n• 提供75µW响铃指示监控，带有两个有源接收器(MAX213);

具有 +/-9V 输出和 +/-15kV ESD 保护的 5V 四通道 120kbps RS-232 线路驱动器/接收器

The MAX208 device consists of four line drivers, four line receivers, and a dual charge-pump circuit with ±15-kV HBM ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronou • ESD Protection for RS-232 I/O Pins \n• ±15-kV Human-Body Model (HBM)\n \n• Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards\n• Operates at 5-V VCC Supply\n• Four Drivers and Four Receivers\n• Operates up to 120 kbit/s\n• External Capacitors: 4 × 0.1 µF\n• Latch-Up Performa;

Transceivers External Capacitors

文件：4.81474 Mbytes Page：20 Pages

MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ESD PROTECTION

文件：777.45 Kbytes Page：16 Pages

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes Page：23 Pages

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes Page：38 Pages

5-V MULTICHANNEL RS-232 LINE DRIVER / RECEIVER WITH -15-KV ESD PROTECTION

文件：287.79 Kbytes Page：14 Pages

5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH -15-KV ESD PROTECTION

文件：270.99 Kbytes Page：15 Pages

丝印代码：MAX208C；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208C；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208C；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208C；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208C；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208I；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208I；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208I；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208I；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MAX208I；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

MPP Tracking DC-DC Converter

The MAX20801 family of Cell-String Optimizers enables cell-string Maximum Power Point Tracking (MPPT), providing superior photovoltaic (PV) module energy harvest and reliability as compared to both standard panels and those incorporating module level MPPT technologies. \n Photovoltaic cells can only \r\n• Performs MPPT on 20-24 Series Connected PV Cells \r\n• Fast MPPT Reacts Quickly to Changing Conditions \r\n• Integrated Voltage-Limiting Clamps Output Voltage \r\n• Integrated Current-Limiting Clamps Output Current \r\n• Active Bypass Function Eliminates Diodes and Hot-Spots \r\n• Supports Pan;

4A, 3MHz, 2.7V to 16V, Step-Down Switching Regulator

General Description The MAX20804 is a fully integrated, highly efficient, step-down DC-DC switching regulator. It is able to operate from 2.7V to 16V input supplies, and each output can be regulated from 0.5V to 5.8V, delivering up to 4A of load current. The switching frequency of this device ca

4A, 3MHz, 2.7V to 16V, Step-Down Switching Regulator

General Description The MAX20804 is a fully integrated, highly efficient, step-down DC-DC switching regulator. It is able to operate from 2.7V to 16V input supplies, and each output can be regulated from 0.5V to 5.8V, delivering up to 4A of load current. The switching frequency of this device ca

4A, 3MHz, 2.7V to 16V, Step-Down Switching Regulator

General Description The MAX20804 is a fully integrated, highly efficient, step-down DC-DC switching regulator. It is able to operate from 2.7V to 16V input supplies, and each output can be regulated from 0.5V to 5.8V, delivering up to 4A of load current. The switching frequency of this device ca

6A, 3MHz, 2.7V to 16V, Step-Down Switching Regulator

Benefits and Features •High Power Density with Low Component Count •Single-Supply Operation with Integrated LDO forBias Generation •Compact 3.0mm x 2.5mm, 14-Pin, FC2QFNPackage •Internal Compensation •Wide Operating Range •2.7V to 16V Input Voltage Range •0.5V to 5.8V Output Voltage Range

6A, 3MHz, 2.7V to 16V, Step-Down Switching Regulator

Benefits and Features •High Power Density with Low Component Count •Single-Supply Operation with Integrated LDO forBias Generation •Compact 3.0mm x 2.5mm, 14-Pin, FC2QFNPackage •Internal Compensation •Wide Operating Range •2.7V to 16V Input Voltage Range •0.5V to 5.8V Output Voltage Range

6A, 3MHz, 2.7V to 16V, Step-Down Switching Regulator

Benefits and Features •High Power Density with Low Component Count •Single-Supply Operation with Integrated LDO forBias Generation •Compact 3.0mm x 2.5mm, 14-Pin, FC2QFNPackage •Internal Compensation •Wide Operating Range •2.7V to 16V Input Voltage Range •0.5V to 5.8V Output Voltage Range

10A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20810 is a fully integrated, highly efficient, step-down DC-DC switching regulator with PMBus interface. The device operates from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 10A of load current. The switching frequency

10A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20810 is a fully integrated, highly efficient, step-down DC-DC switching regulator with PMBus interface. The device operates from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 10A of load current. The switching frequency

10A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20810 is a fully integrated, highly efficient, step-down DC-DC switching regulator with PMBus interface. The device operates from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 10A of load current. The switching frequency

15A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20815 is a fully integrated, highly efficient, step-down DC-DC switching regulator with PMBus interface. The device operates from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 15A of load current. The switching frequency

15A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20815 is a fully integrated, highly efficient, step-down DC-DC switching regulator with PMBus interface. The device operates from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 15A of load current. The switching frequency

15A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20815 is a fully integrated, highly efficient, step-down DC-DC switching regulator with PMBus interface. The device operates from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 15A of load current. The switching frequency

Dual-Output Multiphase High-Current PWMVID and AVSBus Controller

General Description The MAX20816 IC provides a high-density, flexible and scalable dual-loop solution for high-current cores for AI applications. This dual-loop solution supports up to 16 phases in total, configurable from 16+0 to 8+8 phases between Rail A and Rail B. Coupled inductors and sm

Dual-Output 8A, 3MHz, 2.7V-16V Step Down Switching Regulator

General Description The MAX20828T is a dual-output, fully integrated, highly efficient, step-down DC-DC switching regulator. The regulator is able to operate from 2.7V to 16V input supplies, and each output can be regulated from 0.5V to 5.8V, delivering up to 8A of load current per output. The tw

Dual-Output 8A, 3MHz, 2.7V-16V Step Down Switching Regulator

General Description The MAX20828T is a dual-output, fully integrated, highly efficient, step-down DC-DC switching regulator. The regulator is able to operate from 2.7V to 16V input supplies, and each output can be regulated from 0.5V to 5.8V, delivering up to 8A of load current per output. The tw

Dual-Output 8A, 3MHz, 2.7V-16V Step Down Switching Regulator

General Description The MAX20828T is a dual-output, fully integrated, highly efficient, step-down DC-DC switching regulator. The regulator is able to operate from 2.7V to 16V input supplies, and each output can be regulated from 0.5V to 5.8V, delivering up to 8A of load current per output. The tw

30A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20830/MAX20830T are fully integrated, highly efficient, step-down DC-DC switching regulators with a PMBus interface. The devices operate from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 30A of load current. The switchi

30A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20830/MAX20830T are fully integrated, highly efficient, step-down DC-DC switching regulators with a PMBus interface. The devices operate from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 30A of load current. The switchi

30A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20830/MAX20830T are fully integrated, highly efficient, step-down DC-DC switching regulators with a PMBus interface. The devices operate from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 30A of load current. The switchi

30A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20830/MAX20830T are fully integrated, highly efficient, step-down DC-DC switching regulators with a PMBus interface. The devices operate from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 30A of load current. The switchi

30A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

General Description The MAX20830/MAX20830T are fully integrated, highly efficient, step-down DC-DC switching regulators with a PMBus interface. The devices operate from 2.7V to 16V input supplies, and the output can be adjusted from 0.4V to 5.8V, delivering up to 30A of load current. The switchi

40A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

Benefits and Features •High Power Density with Low Component Count •Compact 4.3mm x 6.55mm, 16-Pin FC2QFNPackage •Internal Compensation •Single-Supply Operation with Integrated LDO forBias Generation •Wide Operating Range •2.7V to 16V Input Voltage Range •0.4V to 5.8V Output Voltage Range

40A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

Benefits and Features •High Power Density with Low Component Count •Compact 4.3mm x 6.55mm, 16-Pin FC2QFNPackage •Internal Compensation •Single-Supply Operation with Integrated LDO forBias Generation •Wide Operating Range •2.7V to 16V Input Voltage Range •0.4V to 5.8V Output Voltage Range

40A, 2MHz, 2.7V to 16V Integrated Step-Down Switching Regulator with PMBus

Benefits and Features •High Power Density with Low Component Count •Compact 4.3mm x 6.55mm, 16-Pin FC2QFNPackage •Internal Compensation •Single-Supply Operation with Integrated LDO forBias Generation •Wide Operating Range •2.7V to 16V Input Voltage Range •0.4V to 5.8V Output Voltage Range

4x5 Smart Power-Stage IC with Integrated Current and Temperature Sensors

Features • Space-Optimized Solution • Monolithic, Smart Power Stage • Integrated VCC and VDD Capacitors • Phase-Current Steering for Thermal Balance • Small Footprint: 20mm2 • Peak Efficiency 1-Phase, 600kHz, 12V VIN • 92.4% at 1V VOUT • 95% at 1.8V VOUT • 300kHz to 1.3MHz Switchi

4x5 Smart Power-Stage IC with Integrated Current and Temperature Sensors

Features • Space-Optimized Solution • Monolithic, Smart Power Stage • Integrated VCC and VDD Capacitors • Phase-Current Steering for Thermal Balance • Small Footprint: 20mm2 • Peak Efficiency 1-Phase, 600kHz, 12V VIN • 92.4% at 1V VOUT • 95% at 1.8V VOUT • 300kHz to 1.3MHz Switchi

4x6 Smart Power-Stage IC with Integrated LDO, Current, and Temperature Sensors

General Description The MAX20846 is a feature-rich, smart power-stage IC designed to work with Analog Devices’ controllers to implement a high-density multiphase voltage regulator. Multiple smart power-stage ICs plus a controller provide a compact synchronous buck converter that includes acc

VR14 8-Phase, Dual-Output Voltage Regulator Chipset

Features • High Power Density and Efficiency • Smart Power-Stage Support • Top-Tier Efficiency (96.1% Peak Efficiency at 1.8VOUT) • Integrated Input Power Monitor • 8-Phase N+M Dual-Loop Multiphase Architecture • Telemetry Through PMBus • Digitally Programmable Configuration • Input V

Dual-Phase 60A, 16V, Scalable Step-Down Regulator with PMBus and AVSBus

Features •High Power Density with Low Component Count •Dual-Phase Operation •Compact 4.25mm x 10mm, 36-Pin, FC2QFNPackage •Internal Compensation •Single-Supply Operation with Integrated LDO forBias Generation •Wide Operating Range •Scalable to up to Four-Phase Operation withExternal Power S

Dual-Phase 60A, 16V, Scalable Step-Down Regulator with PMBus and AVSBus

Features •High Power Density with Low Component Count •Dual-Phase Operation •Compact 4.25mm x 10mm, 36-Pin, FC2QFNPackage •Internal Compensation •Single-Supply Operation with Integrated LDO forBias Generation •Wide Operating Range •Scalable to up to Four-Phase Operation withExternal Power S

Dual-Phase 60A, 16V, Scalable Step-Down Regulator with PMBus and AVSBus

Features •High Power Density with Low Component Count •Dual-Phase Operation •Compact 4.25mm x 10mm, 36-Pin, FC2QFNPackage •Internal Compensation •Single-Supply Operation with Integrated LDO forBias Generation •Wide Operating Range •Scalable to up to Four-Phase Operation withExternal Power S

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

丝印代码：MA208C；5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

1FEATURES · ESD Protection for RS-232 I/O Pins – ±15-kV Human-Body Model (HBM) · Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards · Operates at 5-V VCC Supply · Four Drivers and Four Receivers · Operates up to 120 kbit/s · External Capacitors: 4 × 0.1 mF · Latch-U

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl