5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

+5V、RS-232收发器，0.1µF外部电容

\n\n • Saves Board Space•Integrated Charge Pump Circuitry\n• Eliminates the Need for a Bipolar ±12V Supply•Enables Single Supply Operation From Either +5V or 9V to +12V\n\n\n•Integrated 0.1μF Capacitors (MAX203, MAX205)•24 pin SSOP Package Saves Up to 40% Versus SO Package\n\n\n•Saves Power for Longe;

Transceivers External Capacitors

文件：4.81474 Mbytes Page：20 Pages

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes Page：23 Pages

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes Page：38 Pages

50MHz至1000MHz、高线性度、可串行/并行控制的双通道数字VGA

MAX2063高线性度、双通道数字调节可变增益放大器(VGA)工作在50MHz至1000MHz频率范围。可通过SPI兼容接口控制作为从机外设的每路数字衰减器；也允许以1dB步长通过5位并行总线控制，可调节范围为31dB。该器件还增加了“速射”增益选择，直接设置在4种增益选项的一种，用户可通过SPI接口预先设置四种增益选项。2个独立的控制引脚允许用户快速选择4种定制衰减状态的任何一个，无需SPI总线编程。\n 因为每一级电路都具有RF输入和RF输出，通过适当配置可以优化噪声系数(放大器配置为第一级)或OIP3 (放大器配置为最后一级)。该器件还包含具有24dB增益的放大器(放大器本身)，增益最大 \n• 两个通道可独立控制 \n• 50MHz至1000MHz RF频率范围 \n• 引脚兼容系列包括 \n• MAX2062 (模拟/数字VGA) \n• MAX2064 (模拟VGA) \n• 21.3dB (典型值)最大增益 \n• 100MHz带宽内保持0.25dB的增益平坦度 \n• 31dB增益范围 \n• 200MHz频率下具有58dB通道隔离 \n• 支持4种“速射”预编程衰减设置选项 \n• 快速设置4种定制衰减状态之一，无需SPI总线编程 \n• 理想用于快速响应和大信号阻塞保护 \n• 避免ADC过驱动 \n• 200MHz时具有优异的线性特性 \n• +41dBm OI;

50MHz至1000MHz、高线性度、串行/模拟控制VGA

MAX2064为高线性度、双通道模拟调节可变增益放大器(VGA)，工作在50MHz至1000MHz频率范围。每路模拟衰减器可由外部电压控制，或者通过SPI兼容接口利用片上8位DAC控制。\n\n 因为每一级电路都具有RF输入和RF输出，通过适当配置可以优化噪声系数(放大器配置为第一级)或OIP3 (放大器配置为最后一级)。该器件还包含具有24dB增益的放大器(放大器本身)，增益最大时，噪声系数(NF)为4.4dB (包括衰减器的插入损耗)，具有高达+41dBm的OIP3。这些特性使得该器件成为多通道接收器和发射器应用的理想VGA选择。\n\n 此外，器件采用+5V单电源供电 • 可独立控制两个通道\n• 引脚兼容产品： \n• MAX2063 (数字VGA)\n• 22dB (典型值)最大增益 \n• 33dB增益范围 \n• 片内8位DAC用于模拟衰减控制\n• +41dBm OIP3 \n• 输出1dB压缩点为+19dBm\n• 4.4dB典型噪声系数(在200MHz频率)\n• 放大器关断模式支持TDD应用;

50MHz to 1000MHz High-Linearity, Serial/ Parallel-Controlled Analog/Digital VGA

General Description The MAX2065 high-linearity, analog/digital variable gain amplifier (VGA) is designed to operate in the 50MHz to 1000MHz frequency range with two independent attenuators (see the Typical Application Circuit). The digital attenuator is controlled as a slave peripheral using eith

50MHz to 1000MHz High-Linearity, Serial/ Parallel-Controlled Analog/Digital VGA

General Description The MAX2065 high-linearity, analog/digital variable gain amplifier (VGA) is designed to operate in the 50MHz to 1000MHz frequency range with two independent attenuators (see the Typical Application Circuit). The digital attenuator is controlled as a slave peripheral using eith

50MHz to 1000MHz High-Linearity, Serial/ Parallel-Controlled Analog/Digital VGA

General Description The MAX2065 high-linearity, analog/digital variable gain amplifier (VGA) is designed to operate in the 50MHz to 1000MHz frequency range with two independent attenuators (see the Typical Application Circuit). The digital attenuator is controlled as a slave peripheral using eith

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

15kV ESD-Protected, 5V RS-232 Transceivers

General Description The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinati

±15kV ESD-Protected, 5V RS-232 Transceivers

Benefits and Features ● Saves Board Space • Integrated High ±15kV HBM ESD Protection • Integrated Charge Pump Circuitry - Eliminates the Need for a Bipolar ±12V Supply - Enables Single Supply Operation From +5V Supply • Integrated 0.1μF Capacitors (MAX203E, MAX205E) • 24 pin SSOP Package Sa

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

5V, RS-232 Transceivers with 0.1muF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

Dual 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Analog/Digital VGA

文件：4.089 Mbytes Page：24 Pages

Dual 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Analog/Digital VGA

文件：4.089 Mbytes Page：24 Pages

Dual 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Analog/Digital VGA

文件：4.089 Mbytes Page：24 Pages

Dual 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：2.87227 Mbytes Page：22 Pages

Dual 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：2.87227 Mbytes Page：22 Pages

Dual 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：2.87227 Mbytes Page：22 Pages

Dual 50MHz to 1000MHz High-Linearity, Serial/Analog-Controlled VGA

文件：3.47301 Mbytes Page：20 Pages

Dual 50MHz to 1000MHz High-Linearity, Serial/Analog-Controlled VGA

文件：3.47301 Mbytes Page：20 Pages

包装：散装 描述：EVAL KIT FOR MAX2064 开发板，套件，编程器 射频评估和开发套件，开发板

封装/外壳：40-WFQFN 裸露焊盘 包装：托盘 描述：IC AMP CELLULR 50MHZ-1GHZ 40TQFN RF/IF，射频/中频和 RFID 射频放大器

50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：358.77 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：358.77 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：358.77 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：358.77 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：358.77 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA

文件：358.77 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Analog-Controlled VGA

文件：299.28 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Analog-Controlled VGA

文件：299.28 Kbytes Page：23 Pages

50MHz to 1000MHz High-Linearity, Serial/Analog-Controlled VGA

文件：299.28 Kbytes Page：23 Pages

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes Page：23 Pages

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes Page：23 Pages

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes Page：23 Pages

15kV ESD-Protected, 5V RS-232 Transceivers

文件：1.16037 Mbytes Page：25 Pages

짹15kV ESD-Protected,5V RS-232 Transceivers

文件：395.97 Kbytes Page：25 Pages