ECB and LCD Display Bias Supply with Accurate Output Voltage and Temperature Compensation

General Description The MAX1729 micropower step-up/step-down DC-DC converter is ideally suited for electrically controlled birefringence (ECB) and liquid-crystal-display (LCD) bias supply generation. It provides step-up/step-down voltage conversion and reduces output ripple by using a step-up DC-

ECB及LCD偏置电源，带有精确的输出电压及温度补偿

The MAX1729 micropower step-up/step-down DC-DC converter is ideally suited for electrically controlled birefringence (ECB) and liquid-crystal-display (LCD) bias-supply generation. It provides step-up/step-down voltage conversion and reduces output ripple by using a step-up DC-DC converter followed b \n• High-Accuracy Reference Voltage (±1%) \n• ±11ppm/°C Output Voltage Drift \n• On-Chip Temperature Sensor Output \n• Accurate Voltage and Temperature Provide:\n• Consistent ECB Colors \n• Consistent LCD Gray-Scale Contrast\n• +2.7V to +5.5V Input Voltage Range \n• Output Voltage Range\n• +2.5V;

高压微功耗升压转换器

MAX17291B是一款低静态电流升压DC-DC转换器，提供100mA峰值电感限流值和真正关断模式。真正关断模式将输出与输入断开，无正向或反向电流。输出电压通过一个外部电阻分压器设定。MAX17291B的静态电流低、总体解决方案尺寸小且在整个负载范围内的效率高。MAX17291B是一款高度集成的升压转换器，面向需要高电压和小尺寸解决方案的应用（例如传感器模块）而设计。它集成有电源开关、功率二极管和输出负载开关，可以在1.8V至4.5V的输入电源范围内输出5.5V至20V。负载开关在关断模式下会被关断，真正将负载与输入电压断开，从而尽可能地减少关断模式下的漏电流。该器件以断续导通工作模式运行。该 • 输入端的静态电源电流为28μA\n\n• 输出短路保护\n\n• 过温保护\n\n• 真正关断模式\n• 关断电流：13nA\n\n• 输出端无反向电流\n\n\n\n\n• 峰值效率：90%\n\n• 输入范围：1.8V至4.5V\n\n• 输出电压范围：5.5V至20V\n\n• 峰值电感限流值：100mA\n\n• 1.27mm x 0.87mm 6引脚WLP（3 x 2、0.4mm间距）封装\n\n• 工作温度范围：–40°C至+125°C;

高压、微功耗、升压转换器

MAX17291C是一款低静态电流升压DC-DC转换器，提供80mA峰值电感限流值和True Shutdown™。真正关断模式将输出与输入断开，无正向或反向电流。输出电压通过一个外部电阻分压器设定。输出电压可在5.5V至20V之间的宽范围内变化。\n\n MAX17291C采用6引脚、0.4mm间距、晶圆级封装(WLP)。 • 输入端的静态电源电流为28μA\n\n• 输出短路保护\n\n• 过温保护\n\n• 真正关断模式\n• 关断电流：13nA\n\n• 输出端无反向电流\n\n\n\n\n• 峰值效率：87%;

High-Voltage, Micropower, Boost Converter

General Description The MAX17291C is a low quiescent current, boost (stepup), DC-DC converter with 80mA peak inductor current limit and True Shutdown™. True Shutdown disconnects the output from the input with no forward or reverse current. The output voltage is set with an external resistor-

High-Voltage, Micropower, Boost Converter

General Description The MAX17291C is a low quiescent current, boost (stepup), DC-DC converter with 80mA peak inductor current limit and True Shutdown™. True Shutdown disconnects the output from the input with no forward or reverse current. The output voltage is set with an external resistor-

ECB and LCD Display Bias Supply with Accurate Output Voltage and Temperature Compensation

General Description The MAX1729 micropower step-up/step-down DC-DC converter is ideally suited for electrically controlled birefringence (ECB) and liquid-crystal-display (LCD) bias supply generation. It provides step-up/step-down voltage conversion and reduces output ripple by using a step-up DC-

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

封装/外壳：12-WFQFN 裸露焊盘 功能：升压 包装：卷带（TR） 描述：IC REG BOOST ADJUSTABLE 1A 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：12-WFQFN 裸露焊盘 功能：升压 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC REG BOOST ADJUSTABLE 1A 集成电路（IC） DC DC 开关稳压器

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

4.5V to 7.3V, 10A DC power supply

文件：2.40609 Mbytes Page：13 Pages

TDFN Evaluation Kit

文件：437.58 Kbytes Page：6 Pages

Electronic Load Capable of 310mA

文件：413.56 Kbytes Page：6 Pages

Electronic Load Capable of 310mA

文件：413.56 Kbytes Page：6 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current and Reduced EMI

文件：1.34094 Mbytes Page：18 Pages

3V to 8V, 10A DC power supply

文件：406.66 Kbytes Page：8 Pages

Integrated Circuit Pulse Width Modulator (PWM) Control Circuit

Description: The NTE1729 is an inverter control unit in a 16–Lead DIP type package which provides all the control circuitry for PWM type switching regulators. Included in this device is the voltage reference, dual error amplifiers, oscillator, pulse width modulator, pulse steering flip flop, du

RF & MICROWAVE TRANSISTORS HF SSB APPLICATIONS

DESCRIPTION The SD1729 is a Class AB 28 V epitaxial silicon NPN planar transistor designed primarily for SSB communications. This device utilizes emitter ballasting to achieve extreme ruggedness under severe operating conditions. ■ OPTIMIZED FOR SSB ■ 30 MHz ■ 28 VOLTS ■ IMD −30 dB ■ COMMON

Li-Ion Battery Charger Termination Controllers

文件：200.07 Kbytes Page：12 Pages