USB 2.0 Hi-Speed and Audio Switches with Negative Signal Capability and 짹15kV ESD

General Description The MAX14531E–MAX14534E high ESD-protected DP3T switches multiplex Hi-Speed (480 Mbps) USB signals, low/full-speed USB signals, and analog signals such as AC-coupled audio or video through any of three channels. These devices combine the low oncapacitance (CON) and low on-resi

USB 2.0高速信号和音频信号开关，可处理负信号并具有±15kV ESD保护

MAX14531E–MAX14534E带高压ESD保护的DP3T开关复用三个通道的高速(480Mbps) USB信号、低速/全速USB信号以及交流耦合的音频或视频等模拟信号。这些器件具有便携式电子产品中高性能切换应用所需的低导通电容(CON)和低导通电阻(RON)，同时还提供一路内部负电源，从而允许通过低于地电位(低至-2.0V)的交流耦合音频信号。MAX14531E–MAX14534E工作在+2.7V至+5.5V电源电压下。\n MAX14531E–MAX14534E具有关断功能，可降低电源电流并将所有通道设置为高阻态。MAX14531E–MAX14534E的CB0输入具有VBUS检测功能， \n• 10µA (典型值)的低电源电流 \n• 2Ω (典型值)的低导通电阻 \n• 内部旁路电阻降低咔嗒/噼噗声(MAX14532E/MAX14534E) \n• +28V最大额定VBUS检测输入(CB0) \n• 节省空间的、12焊球、1.5mm x 2.0mm WLP封装;

USB 2.0 Hi-Speed and Audio Switches with Negative Signal Capability and 짹15kV ESD

General Description The MAX14531E–MAX14534E high ESD-protected DP3T switches multiplex Hi-Speed (480 Mbps) USB signals, low/full-speed USB signals, and analog signals such as AC-coupled audio or video through any of three channels. These devices combine the low oncapacitance (CON) and low on-resi

IR Receiver Modules for Remote Control Systems

DESCRIPTION This IR receiver series is optimized for short burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the

Angelette Reflector

文件：6.99198 Mbytes Page：120 Pages