Overvoltage Protection with USB Charger Detection, LDO, and ESD Protection on D/D-

文件：266.04 Kbytes Page：9 Pages

具有USB充电检测、LDO的过压保护电路，D+/D-端提供ESD保护

MAX14529E/MAX14530E是带USB充电检测、低压差(LDO)稳压器以及ESD保护的过压保护控制器。两款器件具有RON低至35mΩ (典型值)的内置FET开关，为低压系统提供高达28V的故障保护。当输入电压超出过压门限时，内部FET开关关断，防止损坏被保护的元件。\n\n 充电检测功能监测USB D+和D-数据线间的短路情况。如果数据线短接在一起，且带有专用的充电器，则线路获得大于500mA的电流，用于电池充电。\n\n 过压门限(OVLO)预设为5.75V (MAX14529E)或6.8V (MAX14530E)。\n\n LDO输出(LOUT)由O • 高达28V的输入电压保护\n• 大电流USB充电检测\n• 3.3V、100mA LDO\n• 预设过压保护触发电平\n• 5.75V (MAX14529E)\n• 6.8V (MAX14530E)\n\n\n• 内置RON低至35mΩ (典型值)的FET开关\n• 为USB高速数据线提供小电容(3pF) ESD保护\n• ±15kV人体模式(HBM)\n• ±15kV IEC 61000-4-2气隙放电\n• ±8kV IEC 61000-4-2接触放电\n\n\n• 热关断保护\n• 12焊球、1.5mm x 2mm WLP封装\n• -40°C至+85°C工作温度范围;

Overvoltage Protection with USB Charger Detection, LDO, and ESD Protection on D/D-

General Description The MAX14529E/MAX14530E are overvoltage-protection devices with USB charger detection, a low-dropout (LDO) regulator, and ESD protection. These devices feature a low 35mΩ (typ) RON internal FET switch and protect low-voltage systems against voltage faults up to 28V. When the i

Overvoltage Protection with USB Charger Detection, LDO, and ESD Protection on D/D-

General Description The MAX14529E/MAX14530E are overvoltage-protection devices with USB charger detection, a low-dropout (LDO) regulator, and ESD protection. These devices feature a low 35mΩ (typ) RON internal FET switch and protect low-voltage systems against voltage faults up to 28V. When the i

封装/外壳：12-WFBGA，WLBGA 包装：管件 描述：IC OVERVOLT PROT 5.75V 12WLP 集成电路（IC） 电源管理 - 专用

Overvoltage Protection with USB Charger Detection, LDO, and ESD Protection on D/D-

文件：266.04 Kbytes Page：9 Pages

封装/外壳：12-WFBGA，WLBGA 包装：管件 描述：IC OVERVOLT PROT 5.75V 12-WLP 集成电路（IC） 电源管理 - 专用

DUAL 4 CHANNEL ANALOG DATA SELECTOR

Dual 4-Channel Analog Data Selector The HD14529B analog data selector is a dual 4-channel or single 8-channel device depending on the input coding. The device is suitable for digital as well as analog application, including various one-of-four and one-of-eight data selector functions. Since the d

3.3 VOLT ONLY DRIVER / RECEIVER WITH AN INTEGRATED STANDBY MODE

The MC14529B analog data selector is a dual 4–channel or single 8–channel device depending on the input coding. The device is suitable for digital as well as analog application, including various one–of–four and one–of–eight data selector functions. Since the device has bidirectional analog charac