12/16位DAS，具有ADC、DAC、DPIO、APIO、基准、电压监测器和温度传感器

The MAX1330 is a smart data-acquisition system based on a SAR ADC. It is highly integrated, offering an ADC, a DAC, operational amplifiers, voltage reference, temperature sensors, and analog switches all on the same device. \n• Internal Charge Pump for Analog Circuits (2.7V to 5.5V) \n• 12-Bit Force/Sense DAC16-Word FIFOs \n• System SupportADC Alarm RegisterInternal/External Temperature SensorInternal Oscillator with Clock I/ODigital Programmable I/OAnalog Programmable I/OProgrammable InterruptsAbility to Measure Su;

12-/16-Bit DASs with ADC, DACs, DPIOs, APIOs, Reference, Voltage Monitors, and Temp Sensor

文件：3.60167 Mbytes Page：78 Pages

4通道、汽车应用D类音频放大器

The MAX13301 combines four high-efficiency Class D amplifiers with integrated diagnostic hardware for reliable automotive audio systems, and delivers up to 80W at 10% THD+N per channel into 4Ω when operating from a 24V supply.\n The internal diagnostics evaluate each channel's output impedance t \n• 2 x 160W into 2Ω at 24V \n• 2 Channels Can Be Paralleled \n• Improves THD+N \n• High-Frequency Response \n• Enables Low-Cost Inductors\n• Low 0.04% THD+N \n• On-Board Diagnostics\n• Open/Shorted Load \n• Protection and Monitoring Functions:\n• 50V Load-Dump Protection \n• DC Offse;

4通道、汽车应用D类音频放大器

The MAX13300/MAX13302 combine four high-efficiency Class D amplifiers with integrated diagnostic hardware for reliable automotive audio systems. The MAX13300/ MAX13302 deliver up to 50W at 10% THD+N per channel into 2Ω when operating from a 14.4V supply. The internal diagnostics evaluate each c \n• 2 x 100W into 1Ω at 14.4V \n• 4 x 30W into 4Ω at 14.4V\n• Feedback After the Filter\n• Low Output Impedance \n• Improved Damping of Complex Loads \n• 100dB SNR \n• 70dB PSRR \n• Short-to-Battery/GND \n• Tweeter Detect\n• Short-Circuit Protection \n• Programmable Clip Detection \n• Op;

4-Channel, Automotive Class D Audio Amplifier Feedback After the Filter

文件：2.06565 Mbytes Page：37 Pages

4-Channel, Automotive Class D Audio Amplifier Feedback After the Filter

文件：2.06565 Mbytes Page：37 Pages

4-Channel, Automotive Class D Audio Amplifier Feedback After the Filter

文件：2.06565 Mbytes Page：37 Pages

4-Channel, Automotive Class D Audio Amplifier Feedback After the Filter

文件：2.06565 Mbytes Page：37 Pages

包装：盒 描述：KIT EVAL FOR MAX13301 AUDIO AMP 开发板，套件，编程器 评估板 - 音频放大器

12-/16-Bit DASs with ADC, DACs, DPIOs, APIOs, Reference, Voltage Monitors, and Temp Sensor

文件：3.60167 Mbytes Page：78 Pages

DOLBY B/C TYPE NOISE REDUCTION SYSTEM

Description The CXA1330 / CXA1331 / CXA1332 are bipolar ICs providing two separate Dolby B/C type noise reduction processors. The series is composed of five devices having three Dolby levels and two types of package for various applications.

VARIABLE CAPACITANCE DIODE

DESCRIPTION The KV1330NT variable capacitance diode was specially made to be used as tuning elements in car radios, radio cassettes, stereos, and other consumer radios. The KV1330NT is suitable for wide band tuning from 76 to 108 MHz. If the KV1330NT is used only for FM reception, it is possible

Integrated Circuit Module - Hybrid, Dual, Audio Power Amplifier, 15W/Ch, 2 Power Supplies Required

Integrated Circuit Module – Hybrid, Dual, Audio Power Amplifier, 15W/Ch, 2 Power Supplies Required

Photo Modules for PCM Remote Control Systems

The TSOP13.. – series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.

Low-cost stereo filter DAC

文件：110.19 Kbytes Page：24 Pages