Single-Supply, Low-Power, Serial 8-Bit ADCs

General Description The MAX1106/MAX1107 low-power, 8-bit, single-channel, analog-to-digital converters (ADCs) feature an internal track/hold (T/H), voltage reference, clock, and serial interface. The MAX1106 is specified from +2.7V to +3.6V and consumes only 96µA. The MAX1107 is specified from +4

单电源、低功耗、串行8位ADC

MAX1106/MAX1107低功耗、8位、单通道模数转换器(ADC)具有内部采样/保持(T/H)功能、基准电压源、时钟和串行接口。MAX1106的额定电压范围为+2.7V至+3.6V，电流消耗仅为96µA。MAX1107的额定电压范围为+4.5V至+5.5V，电流消耗仅为107µA。模拟输入可通过引脚配置，支持单极性和单端或差分工作模式。\n\n 满量程模拟输入范围由+2.048V (MAX1106)或+4.096V (MAX1107)内部基准电压或外部施加的1V至VDD基准电压决定。MAX1106/MAX1107还具有引脚可选的关断模式，可在器件不使用时将功耗降至0.5µA。3线 • 单电源：\n• +2.7V至+3.6V (MAX1106)\n\n• +4.5V至+5.5V (MAX1107)\n\n\n\n\n• 低功耗：\n• +3V和25ksps时为96µA\n\n• 关断模式下为0.5µA\n\n\n\n\n• 引脚可编程配置\n\n• 输入电压范围：0至VDD\n\n• 内部采样/保持\n\n• 内部基准电压：\n• +2.048V (MAX1106)\n\n• +4.096V (MAX1107)\n\n\n\n\n• 基准电压输入范围：1V至VDD\n\n• SPI/QSPI/MICROWIRE兼容型串行接口\n\n• 小型10引脚µMAX封装;

24/16位、4通道、同时采样、可级联的Σ-Δ ADC

MAX11040K/MAX11060是一款24/16位、4通道同时采样Σ-Δ模/数转换器(ADC)。允许级联多达8个器件，可同时采样多达32个通道。器件串口可通过一条指令从所有级联器件中读取数据。四个调制器同时转换每路全差分模拟输入，数据输出速率可设置在0.25ksps至64ksps范围。16ksps下，SNR高达106dB；1ksps下，SNR高达117dB (MAX11040K)。器件采用+3V单电源供电。使用内部基准时，差分模拟输入量程为±2.2V；可以选择外部基准。每路输入均具有高达±6V的过压保护。时钟可以采用内部晶振或外部时钟源。 • 特性组合，非常适合用于电能测量系统\n• 可级联多达32路同时采样通道\n• 0至333µs，步长为1.33µs\n• 可编程输出数据率，0.065%分辨率\n• 优异性能，支持高精度测量应用\n• 106dB SNR @ 16ksps\n• ±2.2V满幅输入范围\n• 单电源操作和具有保护的输入，提高设计简洁性和健壮性\n• 2.7V至VAVDD数字供电电压\n• -40°C至+105°C工作温度范围;

24-/16-Bit, 4-Channel, Simultaneous-Sampling, Cascadable, Sigma-Delta ADCs

General Description The MAX11040K/MAX11060 are 24-/16-bit, 4-channel, simultaneous-sampling, sigma-delta analog-to-digital converters (ADCs). The devices allow simultaneous sampling of as many as 32 channels using a built-in cascade feature to synchronize as many as eight devices. The serial inte

12通道、高压传感器、智能数据采集接口

MAX11068是一款可编程、高集成度、高压、12通道、电池监测智能化数据采集接口。优化用于汽车系统、混合动力车、电动汽车及其它设备的多节串联可充电电池组。高度集成的电池检测器结合了简捷的状态机和高速I²C总线，支持SMBus™串行链路通信。\n MAX11068模拟前端由12路电压测量数据采集系统组成，带有高压开关输入单元。所有测量值为电池两端的差分数据，满量程测量范围为0至5.0V，0.5V至4.7V范围内确保稳定的测量精度。输入复用器/开关组允许对电池组的每节电池进行差分测量。采用高速、12位逐次逼近(SAR) A/D转换器量化电池电压。在低于107µs的时间内可以完成全部12节电池的测 \n• 可监测多达12节锂离子(Li+)、NiMH电池或超级电容 \n• 高精度I/O \n• ≤ 5mV失调电压 \n• 12通道高压ADC前端复用器 \n• 12位精度、高速SAR ADC \n• 电池故障检测 \n• 电池检测线开路监测 \n• 12路集成电池均衡开关支持高达200mA的电流 \n• 集成25ppm/°C、2.5V精密基准 \n• 串行链路接口 \n• 自动寻址通信协议 \n• 三个通用数字I/O \n• 待机模式下消耗75µA静态电流 \n• -40°C至+105°C工作温度范围(AEC-Q100 2级) \n• 38引脚、无铅/符合RoHS标准的TSSOP封装(9.7;

Single-Supply, Low-Power, Serial 8-Bit ADCs

General Description The MAX1106/MAX1107 low-power, 8-bit, single-channel, analog-to-digital converters (ADCs) feature an internal track/hold (T/H), voltage reference, clock, and serial interface. The MAX1106 is specified from +2.7V to +3.6V and consumes only 96µA. The MAX1107 is specified from +4

Single-Supply, Low-Power, Serial 8-Bit ADCs

General Description The MAX1106/MAX1107 low-power, 8-bit, single-channel, analog-to-digital converters (ADCs) feature an internal track/hold (T/H), voltage reference, clock, and serial interface. The MAX1106 is specified from +2.7V to +3.6V and consumes only 96µA. The MAX1107 is specified from +4

Single-Supply, Low-Power, Serial 8-Bit ADCs

General Description The MAX1106/MAX1107 low-power, 8-bit, single-channel, analog-to-digital converters (ADCs) feature an internal track/hold (T/H), voltage reference, clock, and serial interface. The MAX1106 is specified from +2.7V to +3.6V and consumes only 96µA. The MAX1107 is specified from +4

24-/16-Bit, 4-Channel, Simultaneous-Sampling, 24-/16-Bit, 4-Channel, Simultaneous-Sampling,

文件：2.13516 Mbytes Page：35 Pages

封装/外壳：38-TFSOP（0.173"，4.40mm 宽） 包装：托盘 描述：IC ADC 16BIT SIGMA-DELTA 38TSSOP 集成电路（IC） 模数转换器（ADC）

12-Channel, High-Voltage Sensor, Smart Data-Acquisition Interface

文件：1.95592 Mbytes Page：82 Pages

功能：电池监视器，汽车 包装：盒 描述：KIT SMART BATT MEASUREMENT 12CH 开发板，套件，编程器 评估和演示板及套件

12-Channel, High-Voltage Sensor, Smart Data-Acquisition Interface

文件：1.95592 Mbytes Page：82 Pages

12-Channel, High-Voltage Sensor, Smart Data-Acquisition Interface

文件：1.95592 Mbytes Page：82 Pages

12-Channel, High-Voltage Sensor, Smart Data-Acquisition Interface

文件：1.95592 Mbytes Page：82 Pages

Advanced Universal Serial Bus transceivers

General description The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and

Advanced Universal Serial Bus transceivers

General description The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and

Advanced Universal Serial Bus transceivers

General description The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and

Melody IC

DOLBY PRO LOGIC SURROUND DECODER

文件：150.83 Kbytes Page：6 Pages