10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

General Description The MAX1026/MAX1028/MAX1030 are serial 10-bit analog-to-digital converters (ADCs) with an internal reference and an internal temperature sensor. These devices feature on-chip FIFO, scan mode, internal clock mode, internal averaging, and AutoShutdown™. The maximum sampling rate

10位、300ksps ADC，带有FIFO、温度传感器及内置电压基准

MAX1026/MAX1028/MAX1030为10位、串行模/数转换器(ADC)，内置基准和温度传感器。这些器件提供内置FIFO、扫描模式、内部时钟模式、内部平均模式以及AutoShutdown™功能。使用外部时钟，最大采样率为300ksps。MAX1030有16个输入通道，MAX1028有12个输入通道，而MAX1026有8个输入通道。所有通道可配制成单极性/双极性模式下的单端输入或差分输入。三种器件均工作于+5V电源下，并且包含与10MHz SPI™/QSPI™/MICROWIRE™兼容的串口。\nMAX1030提供带裸露焊盘的28引脚5mm x 5mm TQFN以及24引脚QSOP封装 • 内部温度传感器(±0.7°C精度) \n• 16路先进/先出(FIFO) \n• 模拟多路复用器具有真差分采样/保持电路 \n• 16、12、8通道单端输入 \n• 8、6、4通道真差分输入(单极性或双极性) \n• 精度：±1 LSB INL、±1 LSB DNL，全温范围内无失码 \n• 扫描模式、内部平均及内部时钟 \n• 低功耗，+5V单电源供电 \n• 300ksps速率下仅消耗2.3mA电流 \n• 内部4.096V基准电压或外部差分基准 \n• 兼容于10MHz 3线SPI/QSPI/MICROWIRE接口 \n• 节省空间的28引脚5mm x 5mm TQFN封装;

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：254.49 Kbytes Page：22 Pages

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：339.68 Kbytes Page：22 Pages

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

General Description The MAX1026/MAX1028/MAX1030 are serial 10-bit analog-to-digital converters (ADCs) with an internal reference and an internal temperature sensor. These devices feature on-chip FIFO, scan mode, internal clock mode, internal averaging, and AutoShutdown™. The maximum sampling rate

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

General Description The MAX1026/MAX1028/MAX1030 are serial 10-bit analog-to-digital converters (ADCs) with an internal reference and an internal temperature sensor. These devices feature on-chip FIFO, scan mode, internal clock mode, internal averaging, and AutoShutdown™. The maximum sampling rate

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

General Description The MAX1026/MAX1028/MAX1030 are serial 10-bit analog-to-digital converters (ADCs) with an internal reference and an internal temperature sensor. These devices feature on-chip FIFO, scan mode, internal clock mode, internal averaging, and AutoShutdown™. The maximum sampling rate

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

General Description The MAX1026/MAX1028/MAX1030 are serial 10-bit analog-to-digital converters (ADCs) with an internal reference and an internal temperature sensor. These devices feature on-chip FIFO, scan mode, internal clock mode, internal averaging, and AutoShutdown™. The maximum sampling rate

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：254.49 Kbytes Page：22 Pages

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：339.68 Kbytes Page：22 Pages

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：339.68 Kbytes Page：22 Pages

封装/外壳：16-SSOP（0.154"，3.90mm 宽） 包装：管件 描述：IC ADC 10BIT SAR 16QSOP 集成电路（IC） 模数转换器（ADC）

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：339.68 Kbytes Page：22 Pages

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：254.49 Kbytes Page：22 Pages

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：339.68 Kbytes Page：22 Pages

封装/外壳：16-SSOP（0.154"，3.90mm 宽） 包装：散装 描述：IC ADC 10BIT 300KSPS 16-QSOP 集成电路（IC） 模数转换器（ADC）

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：339.68 Kbytes Page：22 Pages

10-Bit 300ksps ADCs with FIFO, Temp Sensor, Internal Reference

文件：254.49 Kbytes Page：22 Pages

LINEAR BUILDING BLOCK - LOW POWER COMPARATOR WITH OP AMP AND VOLTAGE REFERENCE

GENERAL DESCRIPTION The TC1026 is a mixed-function device combining a general purpose opamp, comparator and voltage reference in a single 8-pin package. This increased integration allows the user to replace two or three packages, saving space, lowering supply current, and increasing system perfo

LINEAR BUILDING BLOCK - LOW POWER COMPARATOR WITH OP AMP AND VOLTAGE REFERENCE

GENERAL DESCRIPTION The TC1026 is a mixed-function device combining a general purpose opamp, comparator and voltage reference in a single 8-pin package. This increased integration allows the user to replace two or three packages, saving space, lowering supply current, and increasing system perfo

LINEAR BUILDING BLOCK - LOW POWER COMPARATOR WITH OP AMP AND VOLTAGE REFERENCE

GENERAL DESCRIPTION The TC1026 is a mixed-function device combining a general purpose opamp, comparator and voltage reference in a single 8-pin package. This increased integration allows the user to replace two or three packages, saving space, lowering supply current, and increasing system perfo

Data amplifier and laser supply circuit for CD audio and video optical systems ADALASAuto

文件：134.24 Kbytes Page：20 Pages

Data amplifier and laser supply circuit for CD audio and video optical systems ADALASAuto

文件：134.24 Kbytes Page：20 Pages