DOUBLE-BALANCED MIXER

DOUBLE-BALANCED MIXER • LO 7 TO 17 GHz • RF 9 TO 15 GHz • IF DC TO 2.5 GHz • LO DRIVE: +10 dBm (nominal) • LOW NOISE FIGURE: 6.5 dB (TYP.)

Double-Balanced Mixer

Description The M67 is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric and ferrite baluns to attain excellent performance. This mixer can also be used as a phase detector

Double-Balanced Mixer

Description The M67 is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric and ferrite baluns to attain excellent performance. This mixer can also be used as a phase detector

SIMPLE MELODY GENERATOR

DESCRIPTION The M67 series are low power CMOS LSI in TO-92 package, designed for the application of melody generation. The build in oscillator and strong driving capability minimise the external component required. A maximum of 128 notes can be programmed and repeat mode. It is suitable for use i

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

Rad. Tolerant High Speed 8 Kb x 16 Dual Port RAM

Introduction The M67025E is a very low power CMOS dual port static RAM organized as 8192 bit × 16. The product is designed to be used as a stand-alone 16-bit dual port RAM or as a combination MASTER/SLAVE dual port for 32-bit or more width systems. The Atmel MASTER/SLAVE dual port approach in mem

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

VCSO WITH SELECTABLE OUTPUT FREQUENCY DIVIDER

GENERAL DESCRIPTION The M672 is a Voltage Controlled SAW Oscillator (VCSO) with a selectable output frequency divider. The output frequency can be pin-selected to be either the VCSO fundamental frequency (Fvcso) or a fraction of Fvcso (1/8, 1/4, or 1/2 depending on frequency and order code). Avai

Radiation Tolerant FIFOs

Active Errata List • Limitation to the operating conditions inside a timing and data marginal configuration • Reading Errors • Empty Flag Parasitic Pulse Errata Description 1. Limitation to the operating conditionsinside a timing and data marginal configuration. Rising edge of

Rad. Tolerant High Speed 4 Kb x 9 Parallel FIFO

Description The M67204H implements a first-in first-out algorithm, featuring asynchronous read/write operations. The FULL and EMPTY flags prevent data overflow and underflow. The expansion logic allows unlimited expansion in word size and depth with no timing penalties. Twin address pointers auto

Radiation Tolerant FIFOs

Active Errata List • Limitation to the operating conditions inside a timing and data marginal configuration • Reading Errors • Empty Flag Parasitic Pulse Errata Description 1. Limitation to the operating conditionsinside a timing and data marginal configuration. Rising edge of

Rad. Tolerant High Speed 16 Kb x 9 Parallel FIFO with Programmable Flag

Description The M672061H implements a first-in first-out algorithm, featuring asynchronous read/write operations. The FULL and EMPTY flags prevent data overflow and underflow. The Expansion logic allows unlimited expansion in word size and depth with no timing penalties. Twin address pointers aut

Radiation Tolerant FIFOs

Active Errata List • Limitation to the operating conditions inside a timing and data marginal configuration • Reading Errors • Empty Flag Parasitic Pulse Errata Description 1. Limitation to the operating conditionsinside a timing and data marginal configuration. Rising edge of

Rad. Tolerant High Speed 16 Kb x 9 Parallel FIFO

Description The M67206H implements a first-in first-out algorithm, featuring asynchronous read/write operations. The FULL and EMPTY flags prevent data overflow and underflow. The Expansion logic allows unlimited expansion in word size and depth with no timing penalties. Twin address pointers auto

VCSO WITH SELECTABLE OUTPUT FREQUENCY DIVIDER

GENERAL DESCRIPTION The M672 is a Voltage Controlled SAW Oscillator (VCSO) with a selectable output frequency divider. The output frequency can be pin-selected to be either the VCSO fundamental frequency (Fvcso) or a fraction of Fvcso (1/8, 1/4, or 1/2 depending on frequency and order code). Avai

VCSO WITH SELECTABLE OUTPUT FREQUENCY DIVIDER

GENERAL DESCRIPTION The M672 is a Voltage Controlled SAW Oscillator (VCSO) with a selectable output frequency divider. The output frequency can be pin-selected to be either the VCSO fundamental frequency (Fvcso) or a fraction of Fvcso (1/8, 1/4, or 1/2 depending on frequency and order code). Avai

VCSO WITH SELECTABLE OUTPUT FREQUENCY DIVIDER

GENERAL DESCRIPTION The M672 is a Voltage Controlled SAW Oscillator (VCSO) with a selectable output frequency divider. The output frequency can be pin-selected to be either the VCSO fundamental frequency (Fvcso) or a fraction of Fvcso (1/8, 1/4, or 1/2 depending on frequency and order code). Avai

VCSO WITH SELECTABLE OUTPUT FREQUENCY DIVIDER

GENERAL DESCRIPTION The M672 is a Voltage Controlled SAW Oscillator (VCSO) with a selectable output frequency divider. The output frequency can be pin-selected to be either the VCSO fundamental frequency (Fvcso) or a fraction of Fvcso (1/8, 1/4, or 1/2 depending on frequency and order code). Avai

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

M6759 : 8 Bit MTP Micro-controller

[Acer Laboratories Inc.] General Description The M6759 is an 8032/8052 instruction compatible 8-bit microcontroller with MTP Flash ROM for firmware updating. By combining a versatile 8-bit CPU with MTP-Flash, this device provides whole microcontroller system on one chip and still remains the fea

HIGH PERFORMANCE CMOS 16-BIT SINGLE CHIP MICROCONTROLLER

806-870MHz,7.5V,4W,FM PORTABLE RADIO

RF POWER MODULE 806-870MHz,7.5V,4W,FM PORTABLE RADIO