1.25 Gbps AGC Pre-Amplifier

The M02016 CMOS transimpedance amplifier (TIA) with AGC is manufactured in sub-micron CMOS. The AGC gives a wide dynamic range of 35 db. The high transimpedance gain of 24 kO gives good sensitivity. For optimum system performance, the M02016 die should be mounted with a silicon or InGaAs PIN photode ·Typical -29dBm sensitivity, +6 dBm saturation at 1.25 Gbps when used with 0.9 A/W InGaAs PIN. (Cpd = 0.5pF, BER 10-10)\n·Same pad layout and die size as M02011/3/4/5\n·Internal or external bias for photodiode\n·AGC provides dynamic range of 35 dBm\n·Monitor Output\n·Available in die form only\n·PIN;

CMOS Transimpedance Amplifier with AGC for Fiber Optic Networks up to 1.25 Gbps

文件：360.37 Kbytes Page：20 Pages

AEC-Q200 Qualified High Frequency 70 GHz Thin Film Chip ResistorS

FEATURES • Operating frequency 70 GHz • AEC-Q200 qualified (CHA02016 flip chip only) • Thin film microwave resistors • Flip chip, wraparound or one face termination • Small size, down to 20 mils by 16 mils • Edged trimmed block resistors • Pure alumina substrate (99.5 ) • Ohmic range: 10R

AEC-Q200 Qualified High Frequency 70 GHz Thin Film Chip ResistorS

FEATURES • Operating frequency 70 GHz • AEC-Q200 qualified (CHA02016 flip chip only) • Thin film microwave resistors • Flip chip, wraparound or one face termination • Small size, down to 20 mils by 16 mils • Edged trimmed block resistors • Pure alumina substrate (99.5 ) • Ohmic range: 10R

High Frequency 50 GHz Thin Film Chip Resistor

文件：144.67 Kbytes Page：11 Pages

200-300 WATTS SINGLE & MULTIPLE OUTPUT AC/DC MEDICAL

文件：802.15 Kbytes Page：3 Pages