Description

The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Features

• 500W peak pulse capability at 10/1000μs waveform, repetition rate

(duty cycles):0.01

• VBR @ TJ= VBR@25°C x (1+α T x (TJ - 25))

(α T:Temperature Coeffcient, typical value is 0.1)

• Glass passivated chip junction in DO-15 Package

• Fast response time: typically less than 1.0ps from 0 Volts to BV min

• Excellent clamping capability

• Typical failure mode is short from over-specifed voltage or current

• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c

• IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)

• ESD protection of data lines in accordance with IEC 61000-4-2

• EFT protection of data lines in accordance with IEC 61000-4-4

• Low incremental surge resistance

• Typical IR less than 1μA when VBR max>13V

• High temperature to reflow soldering guaranteed:

260°C/40sec/0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension

• Plastic package is flammability rated V-0 per Underwriters Laboratories

• Matte tin lead–free plated

• Halogen free and RoHS compliant

• Pb-free E3 means 2nd level interconnect is Pb-free and

the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

Applications

TVS devices are ideal for the protection of I/O interfaces,

VCC bus and other vulnerable circuits used in telecom,

computer, industrial and consumer electronic applications.