Description

Preserves starting battery voltage by isolating the auxiliary

battery when system voltage drops. For vehicles with two

batteries (or banks of batteries). Turns any electromechanical

solenoid or relay into a Smart Isolator.

Features and Benefits

• Isolates main and auxiliary batteries when system voltage

drops below 12.7V, and automatically reconnects battery

banks at 13.2V. Preserves starting power; eliminates

downtime and jump starts due to dead batteries.

• Start assist feature provides boost to starting battery,

when needed.

• Compatible with modern electronically controlled

alternators (some diode Battery Isolators are not). Smart

Battery Isolator Controller eliminates false battery

warnings created by diode isolators.

• Status light output drives remote light, informing operator

when banks are connected.

• Auto-ranging to automatically sense the voltage of the

system (12 or 24V) and selects the presets appropriate to

that voltage.

• Waterproof, dustproof and vibration-proof. Sealed to IP67

so it can mount on a vehicle even in places where roadsplash

is a problem.

• Ultra low 1mA standby current means minimal battery

drain – especially valuable when vehicle is in storage or not

in use.

• Factory programmable unit is highly versatile: with a broad

range of presets available to match any special application.

• Rated for more than 1,000,000 on-off cycles – unit

operates for the lifetime of the vehicle. Solid state

technology gives long life and low maintenance.

• Compact design (4 x 3 x 1”) – Uses less space; mounts

outside or inside. Saves money by eliminating other

hardware, and provides better wire routing.