Legacy Device: Motorola MC145583

The ML145583 is a CMOS transceiver composed of three drivers and five receivers that fulfills the electrical specifications of EIA–232–E, EIA–562, and CCITT V.28 while operating from a single + 3.3 or + 5.0 V power supply. This transceiver is a high–performance, low–power consumption device that is equipped with a standby function.

A voltage tripler and inverter converts the + 3.3 V to ± 8.8 V, or a voltage doubler and inverter converts the + 5.0 V to ± 8.8 V. This is accomplished through an on–chip 40 kHz oscillator and five inexpensive external capacitors.

FEATURES

Drivers:

• ± 5 V Minimum Output Swing at 3.3 or 5.0 V Power Supply

• 300 Ω Power–Off Impedance

• Output Current Limiting

• Three–State Outputs During Standby Mode

Receivers:

• ± 25 V Input Range

• 3 to 7 kΩ Input Impedance

• 0.8 V Hysteresis for Enhanced Noise Immunity

• Three–State Outputs During Standby Mode

Ring Monitor Circuit:

• Invert the Input Level on Rx1 to Logic Output Level on RIMON at Standby Mode