Input Cable Assembly

DESCRIPTION The LX9501G is an input-connector cable assembly that is used to connect Microsemi’s standard line of backlight inverter products. The connector housing is interconnectable and compatible with PC boards mounted with the Molex* 53261 series 8-pin SMT header. The housing and phosphor

Legacy Power Management

Digitally Programmable Delay Generator

GENERAL DESCRIPTION The AD9501 is a digitally programmable delay generator which provides programmed time delays of an input pulse. Operating from a single +5 V supply, the AD9501 is TTL- or CMOS compatible, and is capable of providing accurate timing adjustments with resolutions as low as 10 ps.

Digitally Programmable Delay Generator

GENERAL DESCRIPTION The AD9501 is a digitally programmable delay generator which provides programmed time delays of an input pulse. Operating from a single +5 V supply, the AD9501 is TTL- or CMOS compatible, and is capable of providing accurate timing adjustments with resolutions as low as 10 ps.

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9501 is a low power 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is ava

12-Bit, Voltage Output D/A Converter

DESCRIPTION… The SP9501 is a low power 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter uses a standard 3–wire serial interface compatible with SPI™, QSPI™ and Microwire™. The output settling-time is specified at 4µs. The SP9501 is ava

531/1063 Mbaud Fibre Channel Transmitter and Receiver

TriQuint’s Fibre Channel transmitter (TQ9501) and receiver (TQ9502) are part of the FC531/FC1063 (Fibre Channel 531 and 1063 Megabaud) chip set. In addition to the transmitter and receiver, TriQuint offers the ENcoder/DECoder (TQ9303 ENDEC). The TQ9501, TQ9502, TQ9303 and a gigabit fiber optic mod