音频功率放大器

Ultra-low noise floor, low EMI, PBTL-equipped, 2x25W stereo audio power amplifier

Features  Operating Voltage Range: 6.0V-18V  Applicable to mono PBTL mode  Output Power  BTL Mode: at 10% THD+N – 2x18.3W, at VDD=12V, RL=4Ω – 2x28.0W, at VDD=15V, RL=4Ω – 2x29.0W, at VDD=18V, RL=6Ω at 1% THD+N – 2x15.2W, at VDD=12V, RL=4Ω – 2x23.0W, at VDD=15V, RL=4Ω – 2x2

低EMI、低底噪、带PLIMT、PBTL、2x30W 立体声音频功率放大器

超低底噪、低EMI、带PBTL、40倍增益、2x25W 立体声音频功率放大器

2-Channel, 256-Position Digital Potentiometer

GENERAL DESCRIPTION The AD5207 provides dual channel, 256-position, digitally controlled variable resistor (VR) devices that perform the same electronic adjustment function as a potentiometer or variable resistor. Each channel of the AD5207 contains a fixed resistor with a wiper contact that ta

Increment/Decrement Digital Potentiometer

GENERAL DESCRIPTION The AD5220 provides a single channel, 128-position digitally controlled variable resistor (VR) device. This device performs the same electronic adjustment function as a potentiometer or variable resistor. These products were optimized for instrument and test equipment push-but

12MHz Rail-to-Rail Input-Output Op Amps

General Description The EL5420C and EL5220C are low power, high voltage, rail-to-rail input-output amplifiers. The EL5220C contains two amplifiers in one package, and the EL5420C contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 500µA peramplifier, the

12MHz Rail-to-Rail Input-Output Op Amps

General Description The EL5420C and EL5220C are low power, high voltage, rail-to-rail input-output amplifiers. The EL5220C contains two amplifiers in one package, and the EL5420C contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 500µA peramplifier, the

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • Mini power type package (2-pin) • Allowing automatic mounting with the emboss taping • Sharp rising performance