智能电池充电器控制器

LTC®4100 智能电池充电器是一款单芯片充电解决方案，它极大地简化了 SBS 兼容型系统的结构。LTC4100 实现了一种 Level 2 充电器功能，凭借此功能即可利用电池或主机来设置充电器。对处于充电状态的电池上的一个 SafetySignal 进行监视，以获得温度、连通性和电池类型信息。当 AC 电源适配器被拿掉时，SMBus 接口保持运行状态，并对发送给它的 SMBus 活动信息做出响应，包括SafetySignal 状态 (通过 ChargerStatus 命令)。另外，当检测到某种状态变化 (例如：电池移除、AC 适配器连接) 时，充电器还将向主机提供一个中断信号。 充电电流和 • 单芯片智能电池充电器控制器 \n\n• 接近100% SMBus (Rev. 1.1) 兼容性的支持允许器件在采用或未采用主机的情况下运作 \n\n• SMBus 加速器改善了 SMBus 定时 \n\n• 宽输出电压范围：3.5V 至 26V \n\n• 硬件中断和 SMBAlert 响应免除了中断轮询 \n\n• 高效率同步降压型充电器 \n\n• 0.5V 压差电压；最大占空比 > 98% \n\n• AC 适配器电流限值较大限度地提升了充电速率 \n\n• ±0.8% 电压准确度；±4% 电流准确度 \n\n• 能够提供高达 4A 的充电电流 \n\;

Dual Smart Battery System Manager Available in 48-Lead TSSOP Package

文件：371.95 Kbytes Page：48 Pages

Smart Battery Charger Controller

文件：251.84 Kbytes Page：24 Pages

Smart Battery Charger Controller

文件：325.67 Kbytes Page：30 Pages

Smart Battery Charger Controller

DESCRIPTION\nThe LTC®4100 Smart Battery Charger is a single chip charging solution that dramatically simplifies construction of an SBS compliant system. The LTC4100 implements a Level 2 charger function whereby the charger can be programmed by the battery or by the host. A SafetySignal on the batter ■ Single Chip Smart Battery Charger Controller\n■ 100% Compliant (Rev. 1.1) SMBus Support Allows\n   for Operation with or without Host\n■ SMBus Accelerator Improves SMBus Timing\n■ Wide Output Voltage Range: 3.5V to 26V\n■ Hardware Interrupt and SMBAlert Response\n   Eliminate Interrupt Polling;

Smart Battery Charger Controller

文件：252.99 Kbytes Page：30 Pages

Smart Battery Charger Controller

文件：325.67 Kbytes Page：30 Pages

Smart Battery Charger Controller

文件：251.84 Kbytes Page：24 Pages

封装/外壳：24-SSOP（0.209"，5.30mm 宽） 包装：管件 描述：IC BATT CHG SMART 1CEL 24SSOP 集成电路（IC） 电池充电器

封装/外壳：24-SSOP（0.209"，5.30mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BATT CHG SMART 1CEL 24SSOP 集成电路（IC） 电池充电器

Smart Battery Charger Controller

文件：252.99 Kbytes Page：30 Pages

Smart Battery Charger Controller

文件：252.99 Kbytes Page：30 Pages

INTEGRATED PRESSURE SENSOR 20 to 105 kPa (2.9 to 15.2 psi) 0.3 to 4.9 V Output

Integrated Silicon Pressure Sensor Manifold Absolute Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The MPX4100 series Manifold Absolute Pressure (MAP) sensor for engine control is designed to sense absolute air pressure within the intake manifold. This mea

INTEGRATED PRESSURE SENSOR 20 to 105 kPa (2.9 to 15.2 psi) 0.3 to 4.9 V Output

Integrated Silicon Pressure Sensor Manifold Absolute Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The MPX4100 series Manifold Absolute Pressure (MAP) sensor for engine control is designed to sense absolute air pressure within the intake manifold. This mea

INTEGRATED PRESSURE SENSOR 20 to 105 kPa (2.9 to 15.2 psi) 0.3 to 4.9 V Output

Integrated Silicon Pressure Sensor Manifold Absolute Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The MPX4100 series Manifold Absolute Pressure (MAP) sensor for engine control is designed to sense absolute air pressure within the intake manifold. This mea

X-ducer SILICON PRESSURE SENSORS

文件：134.66 Kbytes Page：8 Pages

ULTRAFAST RECTIFIERS 4.0 AMPERES 900-1000 VOLTS

文件：120.3 Kbytes Page：6 Pages