单路、单 3V 电源、100MHz 视频运算放大器

LT®6205 / LT6206 / LT6207 是低成本、单路 / 双路 / 四路电压反馈放大器，具有 100MHz 增益带宽乘积、450V/μs 转换速率和 50mA 输出电流。这些放大器具有一个包括地电位的输入范围和一个在任一电源轨的 60mV 之内摆动的输出，因而使它们非常适合于单电源操作。 \n\n 这些放大器的性能在 2.7V 至 12.6V 的电源范围内得以保持，并针对 3V、5V 和 ±5V 电源拟订了技术规格。输入可以被驱动至电源范围之外，而不会导致输出受损或倒相。通道之间的隔离度很高，在 10MHz 频率条件下超过 90dB。 \n\n LT6205 • 450V/μs 转换速率 \n• 100MHz 增益带宽乘积 \n• 宽电源范围：2.7V 至 12.6V \n• 轨至轨输出摆幅 \n• 输入共模范围包括地电位 \n• 高输出驱动电流：50mA \n• 通道隔离度：90dB (在 10MHz) \n• 技术规格针对 3V、5V 和 ±5V 电源拟订 \n• 输入失调电压：1mV \n• 低功耗：每个放大器为 20mW (采用单 5V 电源) \n• 工作温度范围：-40ºC 至 125ºC \n• 扁平 (高度仅 1mm) SOT-23 (ThinSOT™) 封装;

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：266.11 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：430.69 Kbytes Page：16 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：266.11 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：430.69 Kbytes Page：16 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：430.69 Kbytes Page：16 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

Single/Dual/Quad Single Supply 3V, 100MHz Video Op Amps

文件：261.459 Kbytes Page：18 Pages

DMOS DUAL FULL BRIDGE DRIVER

DESCRIPTION The L6205 is a DMOS Dual Full Bridge designed for motor control applications, realized in MultiPower-BCD technology, which combines isolated DMOS Power Transistors with CMOS and bipolar circuits on the same chip. Available in PowerDIP20 (16+2+2), PowerSO20 and SO20(16+2+2) packages,

DMOS DUAL FULL BRIDGE DRIVER

DESCRIPTION The L6205 is a DMOS Dual Full Bridge designed for motor control applications, realized in MultiPower-BCD technology, which combines isolated DMOS Power Transistors with CMOS and bipolar circuits on the same chip. Available in PowerDIP20 (16+2+2), PowerSO20 and SO20(16+2+2) packages,

DMOS DUAL FULL BRIDGE DRIVER

DESCRIPTION The L6205 is a DMOS Dual Full Bridge designed for motor control applications, realized in MultiPower-BCD technology, which combines isolated DMOS Power Transistors with CMOS and bipolar circuits on the same chip. Available in PowerDIP20 (16+2+2), PowerSO20 and SO20(16+2+2) packages,

DMOS DUAL FULL BRIDGE DRIVER

DESCRIPTION The L6205 is a DMOS Dual Full Bridge designed for motor control applications, realized in MultiPower-BCD technology, which combines isolated DMOS Power Transistors with CMOS and bipolar circuits on the same chip. Available in PowerDIP20 (16+2+2), PowerSO20 and SO20(16+2+2) packages,

32K x 9 Bit Fast Static RAM

32K x 9 Bit Fast Static RAM The MCM6205D is fabricated using Motorola’s high–performance silicon–gate CMOS technology. Static design eliminates the need for external clocks or timing strobes, while CMOS circuitry reduces power consumption and provides for greater reliability. This device meets J