Low Distortion IF Amplifier/ADC Driver with Digitally Controlled Gain

FEATURES ■ Output IP3 at 100MHz: 40dBm ■ Maximum Output Power: 16dBm ■ Bandwidth: LF to 540MHz ■ Propagation Delay: 0.8ns ■ Maximum Gain: 27dB ■ Gain Control Range: 22.5dB ■ Gain Control Step: 1.5dB ■ Gain Control Settling Time: 500ns ■ Noise Figure: 8.6dB at 100MHz (Max Gain) ■ Output N

Low Distortion IF Amplifier/ADC Driver with Digitally Controlled Gain

文件：184.49 Kbytes Page：16 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 包装：托盘 描述：IC RF AMP GP 0HZ-540MHZ 20TSSOP RF/IF，射频/中频和 RFID 射频放大器

封装/外壳：20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 包装：卷带（TR） 描述：IC RF AMP GP 0HZ-540MHZ 20TSSOP RF/IF，射频/中频和 RFID 射频放大器

SILICON PLANAR ZENER DIODES

Features Silicon Planar Zener Diodes The Zener voltages are graded according to the international E 24 standard. Other voltage tolerances and higher Zener voltages on request.

ZENER DIODE CHIPS

• 1N5518B THRU 1N5546B AVAILABLE IN JANHC AND JANKC PER MIL-PRF-19500/437 • ZENER DIODE CHIPS • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • ELECTRICALLY EQUIVALENT TO 1N5518B THRU 1N5546B • 0.5 WATT CAPABILITY WITH PROPER HEAT SINKING • COMPATIBLE WITH ALL WIRE BONDING

ZENER DIODE, 500mW

• 1N5518BUR-1 THRU 1N5546BUR-1 AVAILABLE IN JAN, JANTX AND JANTXV PER MIL-PRF-19500/437 • ZENER DIODE, 500mW • LEADLESS PACKAGE FOR SURFACE MOUNT • LOW REVERSE LEAKAGE CHARACTERISTICS • METALLURGICALLY BONDED

EIA/ITU 24V PABX SLIC with 25mA Loop Feed

The HC-5524 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a 24V interface between the traditional telephone subscriber pair (Tip and Ring) and the

SURFACE MOUNT SILICON ZENER DIODES

VZ : 3.9 - 200 Volts PD : 3 Watts FEATURES : * Complete Voltage Range 3.9 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free