100VIN Micropower Isolated Flyback Converter with 150V/260mA Switch

DESCRIPTION The LT®8300 is a micropower high voltage isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single external res

42VIN Micropower No-Opto Isolated Flyback Converter with 65V/1.2A Switch

DESCRIPTION The LT®8301 is a micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single external resistor. Intern

42VIN Micropower No-Opto Isolated Flyback Converter with 65V/3.6A Switch

DESCRIPTION The LT®8302/LT8302-3 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external r

100VIN Micropower Isolated Flyback Converter with 150V/260mA Switch

文件：313.4 Kbytes Page：24 Pages

Synchronous Rectifier Controller with Opto-Coupler Driver for Forward Converters

文件：732.04 Kbytes Page：48 Pages

140V CMOS Rail-to-Rail Output, Picoamp Input Current Op Amp

文件：537.53 Kbytes Page：24 Pages

Monolithic High Voltage Isolated Flyback Converter No External Start-Up Resistor

文件：277.28 Kbytes Page：26 Pages

Isolated No Opto-Coupler Flyback Controller

文件：257.26 Kbytes Page：20 Pages

单片式、高电压、隔离型反激式转换器

Monolithic High Voltage Isolated Flyback Converter

文件：264.94 Kbytes Page：26 Pages

封装/外壳：16-TFSOP（0.118"，3.00mm 宽），12 引线 功能：升压/降压 包装：管件 描述：IC REG FLYBACK 240MA 16MSOP 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：16-TFSOP（0.118"，3.00mm 宽），12 引线 功能：升压/降压 包装：卷带（TR） 描述：IC REG FLYBACK 240MA 16MSOP 集成电路（IC） DC DC 开关稳压器

RAST-2.5-Steckverbinder, Raster 2,5/5,0 mm

RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides contact pitch 5.0 mm 3511: for individual conductors 3511-1: for ribbon cable, daisy chain possible 3511-2: for ribbon cable

CMOS IC

DESCRIPTION The UTC 3511 is designed to provide the voltage, and current supervisor function, power good output (PGO), fault protection latch (FPL_N), and protection detector function (PDON_N) control for switching power systems. FEATURES * Over Voltage Detector (OVD) for 3.3V, 5V, 12V. * Unde

3/8 Square Drive Sockets, SAE

文件：158.63 Kbytes Page：3 Pages

PC POWER SUPPLY SUPERVISORS

文件：229.68 Kbytes Page：8 Pages

RAST 2.5 connectors, pitch 2.5/5.0 mm

文件：560.56 Kbytes Page：4 Pages