Dual/Quad 3mA, 100MHz, 750V/짰 Operational Amplifiers

文件：244.73 Kbytes Page：16 Pages

Microprocessor Reset Circuits

GENERAL DESCRIPTION The ADM181x range of voltage monitoring circuits is used in any application where an electronic system needs to be reset when a voltage increases above or below a predetermined value. Because of the reset delay time incorporated into the ADM181x series, these devices provide

Spindle Motor Driver for Floppy-disk Drives?

Overview The LB1813M is 3-phase DD motor driver IC and is an ideal FDD spindle motor driver for 3.5 inch applications. Features • Three phase total wave linear driver. • Eliminates need for output electrolytic capacitor (however, depending on the motor, this may not apply) • On-chip digital s

1.9 GHz UPMIXER AND EXCITER AMPLIFIER

Designed primarily for use in wireless Personal Communication Systems (PCS) applications such as Digital European Cordless Telephone (DECT), Japan’s Personal Handy System (PHS) and the emerging North American systems. The MRFIC1813 is also applicable to 2.4 GHz ISM equipment. The device combines a

Integrated Circuit Color Signal Processor for VCR

Description: The NTE1813 is an integrated circuit in a 22–Lead DIP type package. When combined with the NTE1814, this device provides the functions which process VCR color signals at the 2H/4H/6H mode is NTSC systems. Features: • Low Operating Supply Voltage: VCC = 5V • Low Power Con

P-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR SWITCHING

DESCRIPTION The µPA1813 is a switching device which can be driven directly by a 2.5-V power source. The µPA1813 features a low on-state resistance and excellent switching characteristics, and is suitable for applications such as power switch of portable machine and so on. FEATURES • Can be dri