10MHz, Rail-to-Rail Input and Output Op Amp in SOT-23

Features Applications n Rail-to-Rail Input and Output n Small SOT-23 Package n Gain Bandwidth Product: 10MHz n –40°C to 85°C Operation n Slew Rate: 2.25V/μs n Low Input Offset Voltage: 1.5mV Max n High Output Current: 25mA Min n Specified on 3V, 5V and ±5V Supplies n High Voltage Gain: 1

6.5MHz, 65μA Power Efficient Rail-to-Rail I/O Op Amps

APPLICATIONS n Micropower Active Filters n Portable Instrumentation n Battery or Solar Powered Systems n Automotive Electronics n Gain Bandwidth Product: 6.5MHz n –3dB Bandwidth (AV = +1): 4.5MHz n Low Quiescent Current: 65μA n C-Load™ Op Amp Drives all Capacitive Loads n Offset Voltage:

1.2MHz、0.4V/μs Over-The-Top® 微功率轨至轨输入和输出运放

LT®1638 是一款低功率双路轨至轨输入和输出运算放大器，采用标准 8 引脚 PDIP 和 SO 封装以及 8 引脚 MSOP 封装。LT1639 是一款低功率四路轨至轨输入和输出运算放大器，采用标准 14 引脚 PDIP 和表面贴装型封装。对于空间受限的应用，LT1638 可采用 3mm x 3mm x 0.8mm 双侧微细间距无引线封装 (DFN)。\n\n LT1638 / LT1639 运放可采用所有总电压为 2.5V 至44V 的单工作电源或分离型工作电源，每个放大器仅吸收 170μA 的静态电流。这些放大器具有反向电池保护功能，而且在反向电源高达 18V 的情况下不吸收 • 可在输入高于 V+ 的情况下运作 \n\n• 轨至轨输入和输出 \n\n• 低功率：每个放大器的电流消耗为 230μA (最大值) \n\n• 增益带宽乘积：1.2MHz \n\n• 转换速率：0.4V/μs \n\n• 高输出电流：25mA (最小值) \n\n• 针对 3V、5V 和 ±15V 电源 \n\n• 反向电池保护至 18V \n\n• 无电源排序问题 \n\n• 高电压增益：1500V/mV \n\n• 单电源输入范围：-0.4V 至 44V \n\n• 高 CMRR：98dB \n\n• 无倒相 \n\n• 采用 14 引脚 SO、8 引脚 MSOP 和 DFN 封装;

30MHz, 240關A Power Efficient Rail-to-Rail I/O Op Amps

文件：1.71503 Mbytes Page：26 Pages

1.2MHz, 0.4V/s Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps

文件：262.68 Kbytes Page：18 Pages

High Voltage, High-Side Current Sense

文件：258.26 Kbytes Page：22 Pages

1.2MHz, 0.4V/us Over-The-TopTM Micropower Rail-to-Rail Input and Output Op Amps

文件：323.18 Kbytes Page：12 Pages

1.25MHz, Over-The-Top Micropower, Rail-to-Rail Input and Output Op Amp in SOT-23

文件：184.54 Kbytes Page：16 Pages

3.2MHz, 0.8V/關s Low Power, Over-The-Top Precision Op Amps

文件：1.01461 Mbytes Page：22 Pages

1.3MHz, 20關A Power Efficient Rail-to-Rail I/O Op Amps

文件：1.88956 Mbytes Page：28 Pages

Dual/Quad 3.2MHz, 0.8V/關s Low Power, Over-The-Top Precision Op Amp

文件：860.28 Kbytes Page：22 Pages

1.2MHz, 0.4V/s Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps

文件：262.68 Kbytes Page：18 Pages

1.2MHz, 0.4V/us Over-The-TopTM Micropower Rail-to-Rail Input and Output Op Amps

文件：323.18 Kbytes Page：12 Pages

1.2MHz, 0.4V/關s Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps

文件：245.43 Kbytes Page：16 Pages

1.2MHz, 0.4V/us Over-The-TopTM Micropower Rail-to-Rail Input and Output Op Amps

文件：323.18 Kbytes Page：12 Pages

1.2MHz, 0.4V/關s Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps

文件：245.43 Kbytes Page：16 Pages

1.2MHz, 0.4V/關s Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps

文件：245.43 Kbytes Page：16 Pages

1.2MHz, 0.4V/us Over-The-TopTM Micropower Rail-to-Rail Input and Output Op Amps

文件：323.18 Kbytes Page：12 Pages

1.2MHz, 0.4V/關s Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps

文件：245.43 Kbytes Page：16 Pages

1.2MHz, 0.4V/us Over-The-TopTM Micropower Rail-to-Rail Input and Output Op Amps

文件：323.18 Kbytes Page：12 Pages

1.2MHz, 0.4V/關s Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps

文件：245.43 Kbytes Page：16 Pages

High-Speed Step-Down Controller with Synchronous Rectification for CPU Power

General Description The MAX1639 is an ultra-high-performance, step-down DC-DC controller for CPU power in high-end computer systems. Designed for demanding applications in which output voltage precision and good transient response are critical for proper operation, it delivers over 35A from 1.1V

High-Speed Step-Down Controller with Synchronous Rectification for CPU Power

General Description The MAX1639 is an ultra-high-performance, step-down DC-DC controller for CPU power in high-end computer systems. Designed for demanding applications in which output voltage precision and good transient response are critical for proper operation, it delivers over 35A from 1.1V

Integrated Circuit CMOS Clock Generator/Driver for BBDs

Description: The NTE1639 is a CMOS LSI Clock Generator ina 8–Lead DIP type package capable of generating two phase clock signals of low output impedance for use as a BBD driver. The built–in VGG power supply circuit provides the proper voltages needed for driving BBDs such as the NTE1641.