双通道、微功率、260μW C-Load 微微安培偏置电流 JFET 输入运算放大器

LT®1462 (双通道) 和 LT1463 (四通道) 是一批可为高达 10nF 的容性负载提供微微安培输入偏置电流 (典型值为 1pA) 和单位增益稳定性的微功率运放 (每个放大器的最大电源电流为 45μA)。输出能够将一个 10k 负载摆动至任一个电源的 1.5V 之内，就像那些所需电源电流高出一个数量级的运放一样。这种独特的性能组合使 LT1462 / LT1463 非常适合于很宽的输入和输出阻抗范围。\n\n 在 LT1462 / LT1463 的设计和测试中，重点特别放在了优化低成本 SO-8 封装 (双通道) 和 14 引脚 SO 封装 (四通道) 中的性能上 (针对 • 输入偏置电流：  \n\n• 2pA 最大值 (LT1462A)\n\n• 20pA 最大值 (LT1462、LT1463)\n\n\n\n\n• 每个放大器的电源电流：45μA (最大值)\n\n• 对于高达 10nF 的 C-Load™ 可实现稳定的单位增益\n\n• 输入共模范围包括正电源轨\n\n• 提供了采用 ±5V 和 ±15V 电源时的保证规格\n\n• 增益带宽乘积：175kHz (典型值)\n\n• 转换速率：0.13V/μs (典型值)\n\n• 有保证的匹配规格指标\n\n• 标准引出脚配置：SO-8、SO-14 封装;

Dual/Quad Micropower, 260uW C-Load Picoampere Bias Current JFET Input Op Amps

文件：309.43 Kbytes Page：12 Pages

Dual/Quad Micropower, 260mW C-Load Picoampere Bias Current JFET Input Op Amps

文件：286.45 Kbytes Page：12 Pages

Dual/Quad Micropower, 260mW C-Load Picoampere Bias Current JFET Input Op Amps

文件：286.45 Kbytes Page：12 Pages

Dual/Quad Micropower, 260uW C-Load Picoampere Bias Current JFET Input Op Amps

文件：309.43 Kbytes Page：12 Pages

Dual/Quad Micropower, 260uW C-Load Picoampere Bias Current JFET Input Op Amps

文件：309.43 Kbytes Page：12 Pages

Dual/Quad Micropower, 260uW C-Load Picoampere Bias Current JFET Input Op Amps

文件：309.43 Kbytes Page：12 Pages

Dual/Quad Micropower, 260uW C-Load Picoampere Bias Current JFET Input Op Amps

文件：309.43 Kbytes Page：12 Pages

Low Cost, Miniature Fiber Optic Components with ST, SMA, SC and FC Ports

Description The HFBR-0400 Series of components is designed to provide cost effective, high performance fiber optic communication links for information systems and industrial applications with link distances of up to 4 kilometers. With the HFBR-24X6, the 125 MHz analog receiver, data rates of up t

Low Cost, Miniature Fiber Optic Components with ST, SMA, SC and FC Ports

Description The HFBR-0400 Series of components is designed to provide cost effective, high performance fiber optic communication links for information systems and industrial applications with link distances of up to 4 kilometers. With the HFBR-24X6, the 125 MHz analog receiver, data rates of up t

Very High-Speed Switching Applications

Ultrahigh-Speed Switching Applications Features · Low ON-state resistance. · Ultrahigh-speed switching. · Converters.

HIGH OUTPUT CURRENT CHARGE PUMP DOUBLER

Description The SC1462 is a versatile charge pump designed for use in battery operated power supply applications over the wide input range of 1.65 to 5.5 volts. A simple, low quiescent current charge pump doubler can be implemented without costly inductors or capacitors. Internal MOSFETs and cont

HIGH OUTPUT CURRENT CHARGE PUMP DOUBLER

Description The SC1462 is a versatile charge pump designed for use in battery operated power supply applications over the wide input range of 1.65 to 5.5 volts. A simple, low quiescent current charge pump doubler can be implemented without costly inductors or capacitors. Internal MOSFETs and cont