High Temperature 1.0A, 35MHz Current Feedback Amplifier

FEATURES - Extreme High Temperature Operation: –40°C to 175°C - 1.0A Minimum Output Drive Current - 35MHz Bandwidth, AV = 2, RL = 10 - 900V/μs Slew Rate, AV = 2, RL = 10 - High Input Impedance: 10M - Wide Supply Range: ±5V to ±15V - Shutdown Mode: IS

1.1A, 35MHz Current Feedback Amplifier

FEATURES APPLICATIONS nn 1.1A Minimum Output Drive Current nn 35MHz Bandwidth, AV = 2, RL = 10Ω nn 900V/μs Slew Rate, AV = 2, RL = 10Ω nn High Input Impedance: 10MΩ nn Wide Supply Range: ±5V to ±15V (TO-220 and DD Packages) nn Enhanced θJA SO-16 Package for ±5V Operation nn Shutdown Mode:

快速 ±150mA 电源缓冲器

LT®1010 是一款快速、单位增益缓冲器，能够把现有 IC 运放的输出能力提高一个数量级以上。这款易用型器件降低了快速放大器对容性负载的敏感性，并减少了精准 DC 放大器中的热反馈。 该缓冲器专为内置于反馈环路之中而设计，能够隔离几乎所有的电抗性负载。可以利用单个外部电阻器来改善速度。内部工作电流基本上不受电源电压范围的影响。另外，也可进行单电源操作。 这款单片式 IC 采用 8 引脚 miniDIP、塑料 TO-220 和 8 引脚 DFN 封装。低热阻功率封装有助于降低工作结温。\n\nApplications 提升运放输出 隔离容性负载 驱动长电缆 音频放 • 20MHz 带宽 \n\n• 75V/μs 转换速率 \n\n• 可向 75Ω 阻抗提供 ±10V 驱动电压 \n\n• 5mA 静态电流 \n\n• 可驱动 >1μF 的容性负载 \n\n• 电流限制和热限制 \n\n• 从单个电源 (≥ 4.5V) 获取工作电压 \n\n• 非常低失真运作 \n\n• 采用 8 引脚 miniDIP、塑料 TO-220 和纤巧型 3mm x 3mm x 0.75mm 8 引脚 DFN 封装;

Fast -150mA Power Buffer

文件：1.17789 Mbytes Page：19 Pages

250mA/60MHz Current Feedback Amplifier Adjustable Supply Current

文件：364.5 Kbytes Page：18 Pages

Fast 150mA Power Buffer

文件：692.61 Kbytes Page：20 Pages

500mA Power Op Amp with Adjustable Precision Current Limit

文件：264.04 Kbytes Page：24 Pages

Fast 짹150mA Power Buffer

文件：275.73 Kbytes Page：20 Pages

Fast 150mA Power Buffer

文件：692.61 Kbytes Page：20 Pages

Fast 짹150mA Power Buffer

文件：275.73 Kbytes Page：20 Pages

Fast -150mA Power Buffer

文件：1.17789 Mbytes Page：19 Pages

Fast -150mA Power Buffer

文件：1.17789 Mbytes Page：19 Pages

Fast -150mA Power Buffer

文件：1.17789 Mbytes Page：19 Pages

Fast 짹150mA Power Buffer

文件：275.73 Kbytes Page：20 Pages

Fast 짹150mA Power Buffer

文件：275.73 Kbytes Page：20 Pages

Fast -150mA Power Buffer

文件：1.17789 Mbytes Page：19 Pages

Fast -150mA Power Buffer

文件：1.17789 Mbytes Page：19 Pages

Fast -150mA Power Buffer

文件：1.17789 Mbytes Page：19 Pages

1.0 AMPERE SILICON MINIATURE SINGLE- PHASE BRIDGES(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Amperes FEATURES • Ratings to 1000V PRV • Surge overload rating: 30 Amperes peak • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Mounting position:Any

DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes)

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes FEATURES ● Plastic material used carries Underwriters Laboratory recognition 94V-O ● Low leakage ● Surge overload rating— 30~50 amperes peak ● Ideal for printed circuit board ● Exceeds environmental standards of MIL-S-19500/228

FAST SWITCHING PLASTIC DIODES(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

VOLTAGE 50 to 1000 Volts CURRENT 1.0 Amperes FEATURES • High current capability. • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Low leakage. • Exceeds environmental standards of MIL-S-

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

ULTRAFAST RECOVERY RECTIFIER VOLTAGE 50 to 1000 Volts CURRENT 1.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switchin

GaAs N-Channel MES IC

文件：39.03 Kbytes Page：2 Pages