5 mm (T1 3/4) LED, Non Diffused

Features ● colored, clear package ● optical coupling into light pipes ● for use as optical indicator ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

T1(5mm) LED LAMP

DESCRIPTION The LR 5420 is a standard red GaAsP light emitting diode lamp. The LS 5420 super-red and LY 5420 yellow lamps are fabricated with TSN (transparent substrate nitrogen) technology. The LG 5410 is a gallium phosphide LED lamp. All four have a lightly tinted clear lens with a narrow viewi

5 mm (T1 3/4) LED, Non Diffused

Features ● colored, clear package ● optical coupling into light pipes ● for use as optical indicator ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

5 mm (T1 3/4) LED, Non Diffused

Features ● colored, clear package ● optical coupling into light pipes ● for use as optical indicator ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

5 mm (T1 3/4) LED, Non Diffused

Features ● colored, clear package ● optical coupling into light pipes ● for use as optical indicator ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

5 mm (T1 3/4) LED, Non Diffused

Features ● colored, clear package ● optical coupling into light pipes ● for use as optical indicator ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

5 mm (T1 3/4) LED, Non Diffused

Features ● colored, clear package ● optical coupling into light pipes ● for use as optical indicator ● solder leads without stand-off ● available taped on reel ● load dump resistant acc. to DIN 40839

4/2 way Solenoid Valve for pneumatics

The Type 5420 is a pilot-controlled 4-way seat valve with servo-diaphragms. A minimum differential pressure of 2.5 bar is needed for switch-over. The valve can be mounted on two channel manifolds with a common pressure supply. Type description

Universal Edge Switch Platform

Key Hardware Features • Fixed 24 and 48-port models with gigabit and multi-gigabit support • 30W, 60W, and 90W PoE (Power over Ethernet) support for powering connected devices • 4 x 1/10Gb SFP+ or 4 x 1/10/25Gb built-in uplink ports • 80Gb per unit stacking of up to eight switches • Secure li

12MHz Rail-to-Rail Input-Output Op Amps

The EL5120, EL5220, and EL5420 are low power, high voltage, rail-to-rail input-output amplifiers. The EL5120 contains a single amplifier, the EL5220 contains two amplifiers, and the EL5420 contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 500µA per amplif

Full Thickness Male Blades

文件：380.72 Kbytes Page：2 Pages

Dual 4-Input NAND Gates

文件：93.44 Kbytes Page：4 Pages