Full Bridge Gate Driver with Boost Convertor

LP1115 consists of two parts: Full Bridge Gate Drive and Boost Convertor. The Full Bridge Driver part of LP1115 is a single phase 12V MOSFET gate driver optimized to drive the gates of both high-side and low-side power MOSFETs in a synchronous buck converter. The Boost Convertor part of LP1115 is a · Full Bridge Driver\n· All-In-One Synchronous Buck Driver\n· Bootstrapped High-Side Drive\n· One PWM Signal Generates Both Drives\n· Anti-cross Conduction Protection Circuitry\n· Boost Convertor\n· Up to 94% efficiency\n· Shut-down current:1uA\n· Input and Output voltage Up to 24V\n· ;

Full Bridge Gate Driver with Boost Convertor

文件：537.07 Kbytes Page：10 Pages

丝印代码：LPSLP1115A；Full Bridge Gate Driver with Boost Convertor

文件：537.07 Kbytes Page：10 Pages

丝印代码：LPSLP1115；Full Bridge Gate Driver with Boost Convertor

文件：537.07 Kbytes Page：10 Pages

Integrated Circuit Audio Power Amplifier, 7W

Description: The NTE1115 and NTE1115A are monolithic integrated circuits designed for use as low frequency class B amplifiers. These devices provide 7W power output at 16V/4Ω, 6W at 14.4V/4Ω, 2.5W at 9V/Ω, 1W at 6V/4Ω and works with a wide range of supply voltages (4V to 20V); and gives high ou

Integrated Circuit Audio Power Amplifier, 7W

Description: The NTE1115 and NTE1115A are monolithic integrated circuits designed for use as low frequency class B amplifiers. These devices provide 7W power output at 16V/4Ω, 6W at 14.4V/4Ω, 2.5W at 9V/Ω, 1W at 6V/4Ω and works with a wide range of supply voltages (4V to 20V); and gives high ou

Silicon PNP epitaxial planer transistor

Silicon PNP epitaxial planar transistor For digital circuits ■ Features • Costs can be reduced through downsizing of the equipment and reduction of the number of parts • M type package allowing easy automatic and manual insertion as well as stand-alone fixing to the printed circuit boa

Silicon PNP epitaxial planer transistor

Silicon PNP epitaxial planar transistor For digital circuits ■ Features • Costs can be reduced through downsizing of the equipment and reduction of the number of parts • M type package allowing easy automatic and manual insertion as well as stand-alone fixing to the printed circuit boa

Silicon PNP epitaxial planer transistor

For switching/digital circuits ■ Features ● Two elements incorporated into one package. (Emitter-coupled transistors with built-in resistor) ● Reduction of the mounting area and assembly cost by one half. ■ Basic Part Number of Element ● UN1115 × 2 elements