Adjustable Micropower Voltage Reference

DESCRIPTION The LM385 is micropower 3-terminal adjustable band-gap voltage reference. Operating from 1.24V to 5.3V and over 10mA to 20mA current range. They feature exceptionally low dynamic impedance and good temperature stability. On chip trimming is used to achieve tight voltage tolerance. S

ROD SEALS

DESCRIPTION The BECA 385 profile is a U-ring type single acting rod seal with asymmetrical rubber lips for low-pressure applications. APPLICATIONS Material handling - Lifting Presses Hydraulic cylinders

Timer/Counter with Memory

• EEPROM Memory • Easy DIP Switch Setup • Three Adjustable Presets with Internal Cycle Totalizer • Dual LED Display with Cycle Progress • Selectable SEC, MIN, or HRS Ranges • Nine Timing Ranges 0 to 9.99, 99.9, 999, or HR:MIN, MIN:SEC to 99:59 • Two Counting Ranges 0 to 9999 or 10 to 99990

Multifunction, Multi Range Timer Counter

• Dual Display, 4 digit, 7 segment LED • LED Status Indicator: Relay 1, Relay 2, Seconds, Minutes, Hours • 2 Setpoints • Programmable Input Scaling • Down Counting for Timer, Up/Down Counting for Counter • Batch Counting

Micropower Voltage Reference Diode

General Description The AME385-1.2 is a micropower 2-terminal band-gap voltage regulator diode. It operates over a 15µA to 20mA current range. Each circuit is trimmed at wafer sort to provide a ±0.2 and ±0.5 initial tolerance. The design of the AME385-1.2 allows for a large range of load capacita

CIRCUIT PROTECTORS

文件：88.6 Kbytes Page：2 Pages