位置：首页 > IC中文资料第949页 > LM285
LM285价格
参考价格：￥14.4472
型号：LM2852XMXA-0.8/NOPB 品牌：TI 备注：这里有LM285多少钱，2025年最近7天走势，今日出价，今日竞价，LM285批发/采购报价，LM285行情走势销售排行榜，LM285报价。| 型号 | 功能描述 | 生产厂家 企业 | LOGO | 操作 |
|---|---|---|---|---|
LM285 | Micropower Voltage Reference Diodes The LM285/LM385 series are micropower two−terminal bandgap voltage regulator diodes. Designed to operate over a wide current range of 10 A to 20 mA, these devices feature exceptionally low dynamic impedance, low noise and stable operation over time and temperature. Tight voltage tolerances are ac | ONSEMI 安森美半导体 |   | |
LM285 | LM185/LM285/LM385 Adjustable Micropower Voltage References 1FEATURES 2• Adjustable from 1.24V to 5.30V • Operating Current of 10μA to 20mA • 1% and 2% Initial Tolerance • 1Ω Dynamic Impedance • Low Temperature Coefficient DESCRIPTION The LM185/LM285/LM385 are micropower 3-terminal adjustable band-gap voltage reference diodes. Operating | TI 德州仪器 | | |
LM285 | MICROPOWER VOLTAGE REFERENCE DIODES The LM285/LM385 series are micropower two–terminal bandgap voltage regulator diodes. Designed to operate over a wide current range of 10 µA to 20 mA, these devices feature exceptionally low dynamic impedance, low noise and stable operation over time and temperature. Tight voltage tolerances are ac | Motorola 摩托罗拉 | | |
LM285 | Adjustable Micropower Voltage References 文件：713.18 Kbytes Page：14 Pages | NSCNational Semiconductor (TI) 美国国家半导体美国国家半导体公司 | | |
LM285 | MICROPOWER VOLTAGE REFERENCE DIODES | ETC 知名厂家 | ETC | |
LM285 | 电压基准芯片 | HGSEMI 华冠 | | |
LM285 | 微功率电压参考二极管 | ONSEMI 安森美半导体 | | |
LM285 | Micropower Voltage Reference Diodes 文件：88.4 Kbytes Page：9 Pages | ONSEMI 安森美半导体 | | |
LM285 | Micropower Voltage Reference Diodes 文件：102.71 Kbytes Page：9 Pages | ONSEMI 安森美半导体 | | |
LM285 | Micropower Voltage Reference Diodes 文件：102.71 Kbytes Page：9 Pages | ONSEMI 安森美半导体 | | |
LM285 | Micropower Voltage Reference Diodes 文件：114.49 Kbytes Page：9 Pages | ONSEMI 安森美半导体 | | |
LM285 | Micropower Voltage Reference Diodes 文件：102.71 Kbytes Page：9 Pages | ONSEMI 安森美半导体 | | |
LM285 | Micropower Voltage Reference Diodes 文件：100.57 Kbytes Page：9 Pages | ONSEMI 安森美半导体 | | |
LM285 | MICROPOWER VOLTAGE REFERENCES 文件：307.77 Kbytes Page：15 Pages | TI 德州仪器 | | |
Voltage Reference Features: ±1% (max) output voltage tolerance at 25°C 50ppm/°C average temperature coefficient at 25°C Wide operating current range 10μA to 20mA No output capacitor required Tolerates capacitive load Bandgap reference corrects temperature drift Low power drain | SS | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LMx85-2.5, LM385B-2.5 Micropower Voltage References 1 Features 1• Operating Current Range 20 μA to 20 mA • 1.5% and 3% Initial Voltage Tolerance • Reference Impedance – LM385 1 Ω Maximum at 25°C – All Devices 1.5 Ω Maximum Over Full Temperature Range • Very Low Power Consumption 2 Applications • Portable Meter References • Porta | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | | ||
LM2852 2A 500/1500 kHz Synchronous Buck Regulator 1 Features 1• Input Voltage Range of 2.85 V to 5.5 V • Factory EEPROM Set Output Voltages from 0.8 V to 3.3 V in 100-mV Increments • Maximum Load Current of 2 A • Voltage Mode Control • Internal Type-Three Compensation • Switching Frequency of 500 kHz or 1.5 MHz • Low Standby Current of 10 | TI 德州仪器 | |
LM285产品属性
- 类型
描述
- 型号
LM285
- 制造商
Texas Instruments
| IC供应商 | 芯片型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
|---|---|---|---|---|---|---|---|
NS |
2016+ |
SOP8 |
3900 |
只做原装,假一罚十,公司可开17%增值税发票! |
|||
TI |
2021 |
TQFP |
1000 |
全新、原装 |
|||
NS |
24+ |
SOP-8 |
48650 |
公司现货实单价可谈 |
|||
TI/德州仪器 |
2023+ |
HTSSOP-14 |
6000 |
原装正品现货、支持第三方检验、终端BOM表可配单提供 |
|||
ADI/亚德诺 |
25+ |
TSSOP-24 |
10000 |
全新原装现货库存 |
|||
ON(安森美) |
2021/2022+ |
标准封装 |
8000 |
原厂原装现货订货价格优势终端BOM表可配单提供样品 |
|||
LINEAR/凌特 |
24+ |
TO-92 |
34569 |
只做原装进口现货 |
|||
ADI(亚德诺) |
23+ |
TO-92 |
7327 |
原厂渠道,品质保证,原装正品现货 |
|||
TI/德州仪器 |
24+ |
TSSOP-14 |
880000 |
明嘉莱只做原装正品现货 |
|||
TI/德州仪器 |
24+ |
TSSOP |
20000 |
郑重承诺只做原装进口现货 |
LM285规格书下载地址
LM285参数引脚图相关
- m1s
- m1105
- lw26
- lvds
- lt15
- ls244
- ls163
- ls138
- lm741
- lm567
- lm5117
- lm393
- lm3886功放电路图
- lm3886
- lm386功放电路
- lm386
- lm358
- lm339
- lm324
- lm311
- LM2895
- LM2893N
- LM2893M
- LM2893
- LM2889N
- LM2889
- LM2879T
- LM2879
- LM2878P
- LM2878
- LM2877P
- LM2877
- LM2876T
- LM2876
- LM285Z
- LM285MX
- LM285M
- LM2854
- LM2853-1.8EVAL/NOPB
- LM2853-1.2EVAL
- LM2853
- LM2852YMXAX-3.3/NOPB
- LM2852YMXAX-1.5/NOPB
- LM2852YMXA-3.3/NOPB
- LM2852YMXA-3.3
- LM2852YMXA-2.5/NOPB
- LM2852YMXA-1.8/NOPB
- LM2852YMXA-1.5/NOPB
- LM2852YMXA-1.3/NOPB
- LM2852YMXA-1.2/NOPB
- LM2852YMXA-0.8/NOPB
- LM2852XMXA-3.3/NOPB
- LM2852XMXA-3.0/NOPB
- LM2852XMXA-2.5/NOPB
- LM2852XMXA-1.8/NOPB
- LM2852XMXA-1.5/NOPB
- LM2852XMXA-1.2/NOPB
- LM2852XMXA-1.0/NOPB
- LM2852XMXA-0.8/NOPB
- LM2852
- LM2842YQMK/NOPB
- LM2842YMKX-ADJ>
- LM2842YMK-ADJL/NOPB
- LM2842XMKX-ADJL/NOPB
- LM2842XMK-ADJL/NOPB
- LM2842XMK-ADJEV/NOPB
- LM2842
- LM2841YQMK/NOPB
- LM2841YMKX-ADJL/NOPB
- LM2841YMK-ADJL/NOPB
- LM2841YMK-ADJEV/NOPB
- LM2841XQMK/NOPB
- LM2841XMKX-ADJL/NOPB
- LM2841XMK-ADJL/NOPB
- LM2841
- LM2840YMK-ADJL/NOPB
- LM2840XQMK/NOPB
- LM2840XMK-ADJL/NOPB
- LM2840
- LM2833ZSD/NOPB
- LM2833ZMYEVAL
- LM2833ZMY/NOPB
- LM2833XSD/NOPB
- LM2833
- LM2832
- LM2831
- LM2830X
- LM2830
- LM2826
- LM2825
- LM281
- LM280Z
- LM27A
- LM2798
- LM2797
- LM27966
- LM27965
- LM27964
- LM27961
- LM2796
LM285数据表相关新闻
LM285D原包原标现货价很好
LM285D原包原标现货价很好
2024-8-22LM2842XMK-ADJL/NOPB制造商:Texas Instruments
LM2842XMK-ADJL/NOPB
2021-9-17LM2830ZMF/NOPB
产品属性 属性值 搜索类似 制造商: Texas Instruments 产品种类: 开关稳压器 RoHS: 详细信息 安装风格: SMD/SMT 封装 / 箱体: SOT-23-5 输出电压: 0.6 V to 4.5 V 输出电流: 1 A 输出端数量: 1 Output 最大输入电压: 5.5 V 拓扑结构: Buck 最小输入电压: 3 V 开关频率: 3000 kHz 最小工作温度:
2020-8-7LM2853MH-1.2/NOPB顺德利科技正品原装进口稳定的货源优势的价格
深圳市顺德利科技有限公司 0755-82725660 18128853661（微信75056055） QQ：782954141
2019-6-18LM2853MH-2.5/NOPB顺德利科技正品原装进口稳定的货源优势的价格
深圳市顺德利科技有限公司 0755-82725660 18128853661（微信75056055） QQ：782954141
2019-6-18LM2788-120毫安高效率降压型开关电容电压转换器
LM2788开关电容降压直流/直流转换器有效地产生一个120毫安低稳压铁路从一个2.6V至5.5V输入。固定输出电压选项1.5V，1.8V和2.0V。 LM2788使用多个分数的增益配置，最大限度地转换在整个输入电压和输出电流效率范围。也有助于整体效率高极低的电源电流的LM2788：32μA经营卸载和关闭0.1μA。最佳的外部元件需求LM2788的解决方案，最大限度地减少尺寸和成本，使得部分锂离子电池和其他电池供电设计的理想选择。两个1μF飞电容和两个10μF的旁路电容是所有是必需的，不需要电感器。LM2788还具有减低噪音的软启动电路，短路保护和过温保护。 特点
2012-12-26
DdatasheetPDF页码索引
- P1
- P2
- P3
- P4
- P5
- P6
- P7
- P8
- P9
- P10
- P11
- P12
- P13
- P14
- P15
- P16
- P17
- P18
- P19
- P20
- P21
- P22
- P23
- P24
- P25
- P26
- P27
- P28
- P29
- P30
- P31
- P32
- P33
- P34
- P35
- P36
- P37
- P38
- P39
- P40
- P41
- P42
- P43
- P44
- P45
- P46
- P47
- P48
- P49
- P50
- P51
- P52
- P53
- P54
- P55
- P56
- P57
- P58
- P59
- P60
- P61
- P62
- P63
- P64
- P65
- P66
- P67
- P68
- P69
- P70
- P71
- P72
- P73
- P74
- P75
- P76
- P77
- P78
- P79
- P80
- P81
- P82
- P83
- P84
- P85
- P86
- P87
- P88
- P89
- P90
- P91
- P92
- P93
- P94
- P95
- P96
- P97
- P98
- P99
- P100
- P101
- P102
- P103
- P104
- P105
