HIGH PRECISION PLATE RESISTORS

文件：449.8 Kbytes Page：1 Pages

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Reverse Voltage - 20 to 100 V Forward Current - 1 A Features • High current capability • High surge current capability • Low forward voltage drop • For use in low voltage, high frequency inverters free wheeling ,and polarity protection applications

THREE-TERMINAL 3 A ADJUSTABLE VOLTAGE REGULATORS

. GUARANTEED 3A OUTPUT CURRENT . ADJUSTABLE OUTPUT DOWN TO 1.2V . LINE REGULATION TYPICALLY 0.005 /V . LOAD REGULATION TYPICALLY 0.1 . GUARANTEED THERMAL REGULATION . CURRENT LIMIT CONSTANT WITH TEM PERATURE . STANDARD 3-LEAD TRANSISTOR PACKAGE

Half Size Voltage Controlled Crystal Oscillator (VCXO)

[General Electronic Devices] Half Size Voltage Controlled Crystal Oscillator (VCXO) • HCMOS/TTL Output • 5.0V Supply Voltage • 8 pin DIP package • Wide Frequency and Pull range

Half Size Voltage Controlled Crystal Oscillator (VCXO)

[General Electronic Devices] Half Size Voltage Controlled Crystal Oscillator (VCXO) • HCMOS/TTL Output • 5.0V Supply Voltage • 8 pin DIP package • Wide Frequency and Pull range

Half Size Voltage Controlled Crystal Oscillator (VCXO)

[General Electronic Devices] Half Size Voltage Controlled Crystal Oscillator (VCXO) • HCMOS/TTL Output • 5.0V Supply Voltage • 8 pin DIP package • Wide Frequency and Pull range

50 Watt DC-DC Converters

Wide input voltage from 8...372 V DC 1, 2 or 3 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltag • Rugged electrical and mechanical design • Outputs individually controlled with excellent dynamic properties • Operating ambient temperature range –40...71°C

50 Watt AC-DC Converters

50 Watt AC-DC Converters Input voltage range 85...264 V AC 1, 2 or 3 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltage • Rugged electrical and mechanical design • Outputs individually controlled with excellent dynamic properties • Operating ambient temperature range –

THREE-TERMINAL 3 A ADJUSTABLE VOLTAGE REGULATORS

. GUARANTEED 3A OUTPUT CURRENT . ADJUSTABLE OUTPUT DOWN TO 1.2V . LINE REGULATION TYPICALLY 0.005 /V . LOAD REGULATION TYPICALLY 0.1 . GUARANTEED THERMAL REGULATION . CURRENT LIMIT CONSTANT WITH TEM PERATURE . STANDARD 3-LEAD TRANSISTOR PACKAGE

COLOR ACTIVE MATRIX LIQUID CRYSTAL DISPLAY

Color Active Matrix Liquid Crystal Display 15.0 XGA TFT LCD

Liquid Crystal Display

General Description The LM150X06-A4C3 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode.

Liquid Crystal Display

General Description LM150X08 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. It has a

GREEN OVAL LAMP LED

GREEN OVAL LAMP LED

INFRARED LAMP LED

CYAN LAMP LED

BLUE OVAL LAMP LED

Description Lamp LEDs are effective in hot thermal and humid condition. This high brightness and weather-resistant packaging design makes these Lamp LEDs ideal for Outdoor applications such as traffic signals, variable message signs and backlighting for transparent sign panels. • Non-standoff le

GATE CONTROLLED TWO CHANNEL INPUT WIDEBAND AMPLIFIER

Gate Controlled Two Channel Input Wideband Amplifier The MC1445/1545 was designed for use as a general purpose gated wideband amplifier, video switch, sense amplifier, multiplexer, modulator, FSK circuit, limiter, AGC circuit, or pulse amplifier. ● Large Bandwidth; 50 MHz Typical ● Channel Sele

LM1458/LM1558 Dual Operational Amplifier

1FEATURES 2• No Frequency Compensation Required • Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • Low-Power Consumption • 8-Lead TO-99 and 8-Lead PDIP • No Latch Up When Input Common Mode Range is Exceeded DESCRIPTION The LM1458 and the LM1558 are general

LM1458/LM1558 Dual Operational Amplifier

1FEATURES 2• No Frequency Compensation Required • Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • Low-Power Consumption • 8-Lead TO-99 and 8-Lead PDIP • No Latch Up When Input Common Mode Range is Exceeded DESCRIPTION The LM1458 and the LM1558 are general

HIGH-GAIN SINGLE AND DUAL OPERATIONAL AMPLIFIERS FOR MILITARY INDUSTRIAL AND COMMERCIAL APPLICATIONS

LM1458/LM1558 Dual Operational Amplifier

1FEATURES 2• No Frequency Compensation Required • Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • Low-Power Consumption • 8-Lead TO-99 and 8-Lead PDIP • No Latch Up When Input Common Mode Range is Exceeded DESCRIPTION The LM1458 and the LM1558 are general

LM1458/LM1558 Dual Operational Amplifier

1FEATURES 2• No Frequency Compensation Required • Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • Low-Power Consumption • 8-Lead TO-99 and 8-Lead PDIP • No Latch Up When Input Common Mode Range is Exceeded DESCRIPTION The LM1458 and the LM1558 are general

LM1458/LM1558 Dual Operational Amplifier

1FEATURES 2• No Frequency Compensation Required • Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • Low-Power Consumption • 8-Lead TO-99 and 8-Lead PDIP • No Latch Up When Input Common Mode Range is Exceeded DESCRIPTION The LM1458 and the LM1558 are general

LM1458/LM1558 Dual Operational Amplifier

1FEATURES 2• No Frequency Compensation Required • Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • Low-Power Consumption • 8-Lead TO-99 and 8-Lead PDIP • No Latch Up When Input Common Mode Range is Exceeded DESCRIPTION The LM1458 and the LM1558 are general

LM1458/LM1558 Dual Operational Amplifier

1FEATURES 2• No Frequency Compensation Required • Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • Low-Power Consumption • 8-Lead TO-99 and 8-Lead PDIP • No Latch Up When Input Common Mode Range is Exceeded DESCRIPTION The LM1458 and the LM1558 are general

LOW POWER DUAL OPERATIONAL AMPLIFIERS

Description These circuits consist of two independent, high gain, internally frequency-compensated op-amps which are designed specifically to operate from a single power supply over a wide range of voltages. The low power supply drain is independent of the magnitude of the power supply voltage.

Low power dual operational amplifi

DESCRIPTION The 532/358/LM2904 consists of two independent, high gain, internally frequency-compensated operational amplifiers internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages. Operation from dual pow

LOW POWER DUAL OPERATIONAL AMPLIFIERS

■ INTERNALLY FREQUENCY COMPENSATED ■ LARGE DC VOLTAGE GAIN: 100dB ■ WIDE BANDWIDTH (unity gain): 1.1MHz (temperature compensated) ■ VERY LOW SUPPLY CURRENT/OP (500µA) ESSENTIALLY INDEPENDENT OF SUPPLY VOLTAGE ■ LOW INPUT BIAS CURRENT: 20nA (temperature compensated) ■ LOW INPUT OFFSET VOLT

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Low-power dual operational amplifiers

Features Frequency compensation implemented internally Large DC voltage gain: 100 dB Wide bandwidth (unity gain): 1.1 MHz (temperature compensated) Very low supply current per channel essentially independent of supply voltage Low input bias current: 20 nA (temperature compensated) Low input

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Dual op amp

main feature: Can work with single power supply or dual power supply ■ Two internally compensated operational amplifiers in one package. ■ Logic circuit matching. ■ Low power consumption. ■Wide frequency range

Low Power Dual Operational Amplifiers

■ Internally frequency compensated ■ Large DC voltage gain: 100dB ■ Wide bandwidth (unity gain): 1.1mHz (temperature compensated) ■ Very low supply current/op (500μA) essentially independent of supply voltage ■ Low input bias current: 20nA (temperature compensated) ■ Low input offset volta

Dual Operational Amplifier

Features Temperature compensated bandwidth (unity gain) Temperature compensated IB: 45nA Wide power supply range, single supply: 3V-32V or dual supplies: ±1.5V to ±16V Low VOS: 2mV, and IOS : 3nA Differential input voltage range equal to the power supply voltage Large output voltage: 0V to

LOW POWER DUAL OPERATIONAL AMPLIFIERS

Description This circuit consists of two independent, high gain, internally frequency-compensated operational amplifiers designed specifically for automotive and industrial control systems. It operates from a single power supply over a wide range of voltages. The low power supply drain is indepen

Low Power Dual Operational Amplifiers

■ Internally frequency compensated ■ Large DC voltage gain: 100dB ■ Wide bandwidth (unity gain): 1.1mHz (temperature compensated) ■ Very low supply current/op (500μA) essentially independent of supply voltage ■ Low input bias current: 20nA (temperature compensated) ■ Low input offset volta

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Low-power dual operational amplifiers

Features Frequency compensation implemented internally Large DC voltage gain: 100 dB Wide bandwidth (unity gain): 1.1 MHz (temperature compensated) Very low supply current per channel essentially independent of supply voltage Low input bias current: 20 nA (temperature compensated) Low input

Low Power Dual Operational Amplifiers

■ Internally frequency compensated ■ Large DC voltage gain: 100dB ■ Wide bandwidth (unity gain): 1.1mHz (temperature compensated) ■ Very low supply current/op (500μA) essentially independent of supply voltage ■ Low input bias current: 20nA (temperature compensated) ■ Low input offset volta

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Dual Operational Amplifier

Features Temperature compensated bandwidth (unity gain) Temperature compensated IB: 20nA Wide power supply range, single supply: 3V-32V or dual supplies: ±1.5V to ±16V Low VOS: 1mV, and IOS : 2nA Differential input voltage range equal to the power supply voltage Large output voltage: 0V to

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3V to 36V (B, BA versions) • Quiescent current: 300μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2mV input offset voltage maximum at 25°C (BA

Low Power Dual Operational Amplifiers

Description These circuits consist of two independent, high gain, internally frequency-compensated op-amps which are designed specifically to operate from a single power supply over a wide range of voltages. The low power supply drain is independent of the magnitude of the power supply voltage.

Low-power dual operational amplifiers

Features Frequency compensation implemented internally Large DC voltage gain: 100 dB Wide bandwidth (unity gain): 1.1 MHz (temperature compensated) Very low supply current per channel essentially independent of supply voltage Low input bias current: 20 nA (temperature compensated) Low input

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3V to 36V (B, BA versions) • Quiescent current: 300μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2mV input offset voltage maximum at 25°C (BA

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3V to 36V (B, BA versions) • Quiescent current: 300μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2mV input offset voltage maximum at 25°C (BA

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3V to 36V (B, BA versions) • Quiescent current: 300μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2mV input offset voltage maximum at 25°C (BA

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3V to 36V (B, BA versions) • Quiescent current: 300μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2mV input offset voltage maximum at 25°C (BA

Industry-Standard Dual Operational Amplifiers

1 Features • Wide supply range of 3 V to 36 V (B, BA versions) • Quiescent current: 300 μA/ch (B, BA versions) • Unity-gain bandwidth of 1.2 MHz (B, BA versions) • Common-mode input voltage range includes ground, enabling direct sensing near ground • 2-mV input offset voltage max. at 25°C (B

Balanced Modulator-Demodulator

Balanced Modulator-Demodulator

Balanced Modulators/Demodulators

Balanced mudulator/demodulator

BALANCED MODULATORS/DEMODULATORS

Integrated Circuit Double Balanced Modulator/Demodulator