丝印代码：LC257A；SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 4.6ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

丝印代码：LC257A；SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 4.6ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

丝印代码：LC257A；SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 4.6ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

丝印代码：LC257A；SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 4.6ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

丝印代码：LC257A；SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 4.6ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

丝印代码：LC257A；SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 4.6ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

丝印代码：LC257A；SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features • Operate from 1.65V to 3.6V • Inputs accept voltages to 5.5V • Maximum tpd of 4.6ns at 3.3V • Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C • Latch-up performance exceeds 250mA per JESD 17

HIGH VOLTAGE VIDEO AMPLIFIERS

DESCRIPTION The BF257, BF258 and BF259 are silicon planar epitaxial NPN transistors in Jedec TO-39 metal case. They are particularly designed for videooutput stages in CTV and MTV sets, class A audio output stages and drivers for horizontal deflection circuits.

QUAD 2 CHANNEL MULTIPLEXER 3-STATE

DESCRIPTION The 74VHC257 is an advanced high-speed CMOS QUAD 2-CHANNEL MULTIPLEXER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. ■ HIGH SPEED: tPD = 3.7ns (TYP.) at VCC = 5V ■ LOW POWER DISSIPATION: ICC = 4 µA (MAX.) at TA=25°C ■ HIGH NOISE I

WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIERS

DESCRIPTION These circuits are monolithic J-FET input operational amplifiers incorporating well matched, high voltage J-FET on the same chip with standard bipolar transistors. This amplifiers feature low input bias and offset currents, low input offset voltage and input offset voltage drift,coup

WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIERS

DESCRIPTION These circuits are monolithic J-FET input operational amplifiers incorporating well matched, high voltage J-FET on the same chip with standard bipolar transistors. This amplifiers feature low input bias and offset currents, low input offset voltage and input offset voltage drift,coup

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE