PWM Input Forward/Reverse Motor Driver

Overview The LB11650 is a full bridge driver that supports switching between forward and reverse directions. It operates in one of four modes under application control: forward, reverse, brake, and open. It also supports direct PWM control from an external signal. The LB11650 is optimal for drivi

PWM Input Forward/Reverse Motor Driver

Overview The LB11650 is a full bridge driver that supports switching between forward and reverse directions. It operates in one of four modes under application control: forward, reverse, brake, and open. It also supports direct PWM control from an external signal. The LB11650 is optimal for drivi

LB11650: PWM Input Forward/Reverse Brush Motor Driver

The LB11650 is a full bridge driver that supports switching between forward and reverse directions. It operates in one of four modes under application control; forward, reverse, brake, and open. It also supports direct PWM control from an external signal. The LB11650 is optimal for driving brush DC Supports PWM input\nBuilt-in high and low side diodes\nSimultaneous on state prevention function (prevents through currents)\nBuilt-in thermal shutdown circuit (latching type)\nHigh and low side short circuit protection function (latching type overcurrent protection)\nExternally controllable modes: ;

PWM Input Forward/Reverse Motor Driver

Overview The LB11650H is a full bridge driver that supports switching between forward and reverse directions. It operates in one of four modes under application control: forward, reverse, brake, and open. It also supports direct PWM control from an external signal. The LB11650 is optimal for driv

封装/外壳：14-SSIP 裸露接片，成形引线 功能：驱动器 - 全集成，控制和功率级 包装：管件 描述：IC MTR DRV BIPLR 3-5.25V 14SIPHZ 集成电路（IC） 电机驱动器，控制器

PWM Input Forward/Reverse Motor Driver

THREE-TERMINAL VOLTAGE REGULATOR

DESCRIPTION The TK116xxU series devices are low dropout, linear 3-terminal regulators. An internal PNP pass-transistor is used in order to achieve low dropout voltage (typically 160 mV at 80 mA load current). The regulated output voltages of 3, 3.3, 5 and 9 V are available. The device has

THREE-TERMINAL VOLTAGE REGULATOR

DESCRIPTION The TK116xxU series devices are low dropout, linear 3-terminal regulators. An internal PNP pass-transistor is used in order to achieve low dropout voltage (typically 160 mV at 80 mA load current). The regulated output voltages of 3, 3.3, 5 and 9 V are available. The device has