for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

Door actuator driver

Features ■ Three half bridges for 1.5A load (Ron=800mΩ) ■ One highside driver for 6A load (Ron=100mΩ) ■ Two highside drivers for 1.5A load (Ron=800mΩ) ■ Programmable softstart function to drive loads with higher inrush currents (i.e. current >6A, >1.5A) ■ Very low current consumption in sta

车门致动器驱动器

The L9954 and L9954XP are microcontroller driven multifunctional door actuator driver for automotive applications. Up to two DC motors and three grounded resistive loads can be driven with three half bridges and three highside drivers.\n\n The integrated standard serial peripheral interface (SPI) co • Overload diagnostic for all outputs \n• Open load diagnostic for all outputs \n• Charge pump output for reverse polarity protection \n• PWM control of all outputs \n• Current monitor output for highside OUT1, OUT4, OUT5 and OUT6 \n• All outputs short circuit protected• Three half bridges for 1.5A ;

封装/外壳：PowerSO-36 裸露底部焊盘 包装：管件 描述：IC DVR DOOR ACTUATOR POWERSO-36 集成电路（IC） 电源管理 - 专用

Door actuator driver

文件：537.18 Kbytes Page：37 Pages

Door actuator driver

Features ■ Three half bridges for 1.5A load (Ron=800mΩ) ■ One highside driver for 6A load (Ron=100mΩ) ■ Two highside drivers for 1.5A load (Ron=800mΩ) ■ Programmable softstart function to drive loads with higher inrush currents (i.e. current >6A, >1.5A) ■ Very low current consumption in sta

Door actuator driver

Features ■ Three half bridges for 0.75 A loads (RDSon = 1600 mΩ) ■ Two configurable high-side driver for up to 1.5A load (RDSon = 500mΩ) or 0.35 A load (Ron = 1800 mΩ) ■ One high-side driver for 6 A load (RDSon = 100 mΩ) ■ Programmable soft start function to drive loads with higher inrush

for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

特殊功能，车门模块驱动器

The L9954LXP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to two DC motors and three grounded resistive loads can be driven with three half bridges and three high-side drivers. The integrated standard Serial Peripheral Interface (SPI) controls all • Overload diagnostic for all outputs \n• Open-load diagnostic for all outputs \n• Charge pump output for reverse polarity protection \n• PWM control of all outputs \n• Current monitor output for high-side OUT1, OUT4, OUT5 and OUT6 \n• All outputs short circuit protected• Three half bridges for 0.75;

Door actuator driver

Features ■ Three half bridges for 0.75 A loads (RDSon = 1600 mΩ) ■ Two configurable high-side driver for up to 1.5A load (RDSon = 500mΩ) or 0.35 A load (Ron = 1800 mΩ) ■ One high-side driver for 6 A load (RDSon = 100 mΩ) ■ Programmable soft start function to drive loads with higher inrush

Door actuator driver

Features ■ Three half bridges for 1.5A load (Ron=800mΩ) ■ One highside driver for 6A load (Ron=100mΩ) ■ Two highside drivers for 1.5A load (Ron=800mΩ) ■ Programmable softstart function to drive loads with higher inrush currents (i.e. current >6A, >1.5A) ■ Very low current consumption in sta

Door actuator driver

Features ■ Three half bridges for 1.5A load (Ron=800mΩ) ■ One highside driver for 6A load (Ron=100mΩ) ■ Two highside drivers for 1.5A load (Ron=800mΩ) ■ Programmable softstart function to drive loads with higher inrush currents (i.e. current >6A, >1.5A) ■ Very low current consumption in sta

for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

Door actuator driver

Features ■ Three half bridges for 1.5A load (Ron=800mΩ) ■ One highside driver for 6A load (Ron=100mΩ) ■ Two highside drivers for 1.5A load (Ron=800mΩ) ■ Programmable softstart function to drive loads with higher inrush currents (i.e. current >6A, >1.5A) ■ Very low current consumption in sta

封装/外壳：PowerSO-36 裸露底部焊盘 包装：管件 描述：IC DVR DOOR ACTUATOR POWERSO-36 集成电路（IC） 电源管理 - 专用

Door actuator driver

文件：537.18 Kbytes Page：37 Pages

Door actuator driver

文件：537.18 Kbytes Page：37 Pages

Door actuator driver

文件：537.18 Kbytes Page：37 Pages

400 MSPS 14-Bit, 1.8 V CMOS Direct Digital Synthesizer

GENERAL DESCRIPTION The AD9954 is a direct digital synthesizer (DDS) that uses advanced technology, coupled with an internal high speed, high performance DAC to form a complete, digitally programmable, high frequency synthesizer capable of generating a frequencyagile analog output sinusoidal wave