Super smart power motor driver with 8-Bit MCU, RAM, EEPROM, ADC, WDG, Timers, PWM and H-bridge driver

Introduction The L9805E is a Super Smart Power device suited to drive resistive and inductive loads under software control. It includes a ST7 microcontroller and some pheripherals. The microcontroller can execute the software contained in the program EPROM/ROM and drive, through dedicated registe

Super smart power motor driver with 8-Bit MCU, RAM, EEPROM, ADC, WDG, Timers, PWM and H-bridge driver

Features ■ 6.4-18V supply operating range ■ 16 MHz maximum oscillator frequency ■ 8 MHz maximum internal clock frequency ■ Oscillator supervisor ■ Fully static operation ■ -40°C to + 150°C temperature range ■ User EPROM/OTP: 16 Kbytes ■ Data RAM: 256 bytes ■ Data EEPROM: 128 bytes ■ 64 p

封装/外壳：64-BQFP 裸露焊盘 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR） 描述：IC MOTOR DRVR 6.4V-18V 64HIQUAD 集成电路（IC） 电机驱动器，控制器

超智能电源电机驱动器，具有8位MCU、RAM、EEPROM、ADC、WDG、定时器、PWM和H桥驱动器

Super smart power motor driver with 8-Bit MCU, RAM, EEPROM, ADC, WDG, Timers, PWM and H-bridge driver

Features ■ 6.4-18V supply operating range ■ 16 MHz maximum oscillator frequency ■ 8 MHz maximum internal clock frequency ■ Oscillator supervisor ■ Fully static operation ■ -40°C to + 150°C temperature range ■ User EPROM/OTP: 16 Kbytes ■ Data RAM: 256 bytes ■ Data EEPROM: 128 bytes ■ 64 p

Super Smart Power Motor Driver with 8-BIT MCU, CAN Interface, 16K EPROM, 256Bytes RAM, 128 Bytes EEPROM, 10 Bit ADC, WDG, 2 Timers, 2 PWM Modules, Ful

INTRODUCTION The L9805 is a Super Smart Power device suited to drive resistive and inductive loads under software control. It includes a ST7 microcontroller and some pheripherals. The microcontroller can execute the software contained in the program EPROM/ROM and drive, through dedicated register

Complete 12-Bit/10-Bit 6 MSPS CCD/CIS Signal Processors

PRODUCTION DESCRIPTION The AD9807 and AD9805 are complete CCD/CIS imaging decoders and signal processors on a single monolithic integrated circuit. The input of the AD9807/AD9805 allows direct ac coupling of the charge-coupled device (CCD) or contact image sensor (CIS) output(s). The AD9807/AD9

Voice ROM Evaluation Board for MSM9802/9803/9805/9836

GENERAL DESCRIPTION The MSM9800/36 Evaluation Board is designed to evaluate sound data, created by using OKI’s Sound Analysis and Editing tool (AR762/203/204), for use with MSM9802/MSM9803/MSM9805/MSM9836. FEATURES • 512 Kbit/1 Mbit/2 Mbit/4 Mbit EPROM can be used for evaluation. • P

Voice Synthesis IC with Built-in Mask ROM

GENERAL DESCRIPTION The MSM9802/03/05 is a PCM voice synthesis IC with built-in mask ROM. This IC has two user selectable playback algorithms, OKI Non-linear PCM and straight PCM. It also contains a current mode 10-bit D/A converter and a low-pass filter. External control has been made easy by

PCI 1284 Printer Port

文件：94.45 Kbytes Page：16 Pages